BIOSENSE WEBSTER INC OPTRELL, 48 ELECTRODES, F-J; CATHETER, ELECTRODE RECORDING, OR PROBE, ELECTRODE RECORDING
|
Back to Search Results |
|
Model Number D140902 |
Device Problems
Display or Visual Feedback Problem (1184); Device Contamination with Body Fluid (2317)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 05/26/2023 |
Event Type
malfunction
|
Event Description
|
It was reported that a patient underwent an idvt ablation procedure with an optrell catheter and the carto 3 system was unable to visualize the splines of the optrell catheter.The medical team could only see the shaft of the catheter after mapping the right ventricle.They tried reseating the catheter with no resolution.They switched to the ablation catheter to continue mapping and continued the procedure.No patient consequences were reported.After the procedure, it was noticed that the electrodes on the optrell catheter were black on the carto 3 system.They had heparinized the patient right before they went to the left side of the heart when they noticed the black electrodes.The optrell catheter remained in the right atrium after the black electrodes were noticed and was not used again for the rest of the procedure.After the procedure, upon inspection of the optrell catheter after being taken out of the body, they noticed coagulation on the same electrodes that were showing up black on the carto 3 system.Visualization issue is not mdr-reportable.Thrombus/clot is mdr-reportable.
|
|
Manufacturer Narrative
|
Since no device has been received for analysis, no product investigation can be performed, and the customer complaint cannot be confirmed.However, a picture was received for evaluation following biosense webster's procedures.According to pictures provided by the customer, black rings were observed on the carto 3 screen, also, a thrombus/clot was observed on some electrodes of the optrell catheter.A manufacturing record evaluation was performed for finished device number 30835542, and no internal actions related to the reported complaint condition were identified.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).
|
|
Manufacturer Narrative
|
On 12-jul-2023, the bwi product analysis lab received the device for evaluation.Device evaluation details: the device was returned to biosense webster for evaluation.A visual inspection, magnetic sensor functionality, and patency test of the returned device were performed in accordance with bwi procedures.The device was visually inspected, and thombus/clot attached on one on electrode of the device's tip was observed.A magnetic sensor functionality test was performed and some black rings were observed on the carto 3 screen.The black rings were displayed on the same electrodes that the thombus/clot was observed.A patency test was performed, and the device was flushing correctly, no obstructed holes were observed.No irrigation issues were observed.A manufacturing record evaluation was performed for the finished device number lot 30835542m and no internal actions related to the complaint were found during the review.The issues reported by the customer were confirmed.The visualization issue reported by the customer could be related with the thombus/clot observed during the analysis.It should be noted that product failure is multifactorial.As part of biosense webster's quality process, all devices are manufactured, inspected, and released to approved specifications.If additional information is received regarding this event, a supplemental 3500a report will be submitted to the fda.Manufacturer's reference number: (b)(4).
|
|
Search Alerts/Recalls
|
|
|