A distributor has informed richard wolf gmbh an issue regarding a ureterorenoscope 12° 8/9.8fr wl 430mm, part id: 8703524, serial # (b)(6).According to the received information, during a diagnostic ureteroscopy/ureterorenoscopy (urs) examination, the distal end of the scope bent and as a result, the monitor failed to display the image.Consequently, the planned surgery for the left mid ureteral area was cancelled.
|
The following fields have new information: h6 (health effect impact code, type of investigation, investigation findings, and investigation conclusions.The ureterorenoscope 12 8/9.8fr wl 430mm, part id: 8703524, serial#: (b)(6), was investigated at rw gmbh.Visual examination revealed that the cladding tube was severely kinked and crushed distally at the taper.Such damage is usually caused by mechanical overload.The exact circumstances that led to the deformation of the sheath and ultimately to the termination of surgery were not reported by the user.The user stated that there were no negative consequences for the patient.The ureterorenoscope 12 8/9.8fr wl 430mm, part id: 8703524, serial#: (b)(6) was produced on 05/aug/2022.The production order consisted of 10 ureterorenoscopes.In the review period of 01/jan/2020 and 19/jun/2023, there were 6 complaints regarding bent and or kinked sheathing tube.The investigation of the cases revealed that the damage caused to the product was due to a mechanical overload.There were no product or production-related root cause identified.The ifu ga-d 352 i usa / 2012-11 v4.0 / eco: 2012-0540 contains several descriptions of visual and functional checks which serve to detect faults prior to use on patient in section 7 use and section 8 checks.Additionally, the ifu states that the products have only limited strength.Applying excessive force will lead to damage, impair the function and endanger the patient.Immediately before and after each use, check the products for damage, loose parts and completeness.Make sure that no missing parts remain in the patient.The subject issue is present in the risk management file a 1- reusable rigid optics with and without working channel, rev.05.The overall probability of occurrence for this issue is consistent with previously defined levels and the overall risk of the device remains in the acceptable category.
|