MAUDE Adverse Event Report: MEDTRONIC IRELAND IN.PACT ADMIRAL PACLITAXEL-ELUTING PTA BALLOON CATHETER; DRUG-ELUTING PERIPHERAL TRANSLUMINAL ANGIOPLAS

Model Number ADM06020013P

Device Problem Burst Container or Vessel (1074)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 07/06/2023

Event Type  malfunction  

Event Description

It was reported that an attempt was made to use an in.Pact admiral to treat a calcified plaque lesion in the center superficial femoral artery.Degree of tortuosity was mild. degree of calcification was moderate.Balloon was inflated with a inflation device.Device was prepped per ifu.The device did not pass through a previously-deployed stent.Excessive force was not used.It was reported that a balloon rupture occurred at nominal pressure.All fragments of the balloon were retrieved. contrast medium leaked during balloon inflation and rupture was confirmed. procedure completed by using another same size balloon.No patient injury reported.

Manufacturer Narrative

Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Additional information: no particular action/intervention was required to remove the balloon or fragments.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Product analysis the device returned with no damage visible to the catheter or balloon.The balloon folds were expanded, and blood was visible in the inflation lumen.A tactile test did not detect any kinks or abnormalities along the length of the catheter.A 0.035-inch guidewire was loaded via the distal tip with no resistance noted.Negative purge did detect a presence of a leak on the device.The device was pressurized, and a leak was observed from the balloon working length.It was not possible to inflate the balloon, the device did not maintain pressure.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: IN.PACT ADMIRAL PACLITAXEL-ELUTING PTA BALLOON CATHETER
• Type of Device: DRUG-ELUTING PERIPHERAL TRANSLUMINAL ANGIOPLAS
• Manufacturer (Section D): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer (Section G): MEDTRONIC IRELAND; parkmore business park west; galway ; EI
• Manufacturer Contact: alison sweeney ; parkmore business park west; galway ; EI ; 091708096
• MDR Report Key: 17339986
• MDR Text Key: 319577667
• Report Number: 9612164-2023-03227
• Device Sequence Number: 1
• Product Code: ONU
• Combination Product (y/n): N
• Reporter Country Code: JA
• PMA/PMN Number: P140010
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Health Professional,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 09/11/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: ADM06020013P
• Device Catalogue Number: ADM06020013P
• Device Lot Number: 0011592151
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 07/06/2023
• Initial Date FDA Received: 07/18/2023
• Supplement Dates Manufacturer Received: 07/31/2023; 08/22/2023
• Supplement Dates FDA Received: 08/21/2023; 09/11/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 01/17/2023
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1