MAUDE Adverse Event Report: SMITH & NEPHEW, INC. OXINIUM FEM HD 12/14 28MM +0; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS

Model Number 71342800

Device Problem Device Dislodged or Dislocated (2923)

Patient Problems Cyst(s) (1800); Joint Dislocation (2374); Osteolysis (2377); Muscle/Tendon Damage (4532)

Event Date 02/19/2023

Event Type  Injury  

Manufacturer Narrative

H10: internal complaint reference: (b)(4).

Event Description

It was reported that, after a bhr-tha revision surgery was performed on (b)(6) 2023, the patient experienced three consecutive dislocations (on (b)(6) 2023).This adverse event was treated by a revision surgery on (b)(6) 2023, where the acetabular cup hap size 48/54, the 48/28mm bh dual mobility insert and the oxinium femoral head 12/14 taper 28 mm +0 were exchanged for zimmer biomet (competitor¿s) devices.Furthermore, during surgery, it was noticed that the patient had periprosthetic osteolysis underneath the inferior margin of the acetabular shell where a significant pseudotumor was present.The patient was taken to the recovery room, extubated and in stable condition.Current health status of the patient is unknown.

Manufacturer Narrative

H3, h6: the devices were not returned for evaluation; therefore, a device analysis could not be performed.The clinical/medical investigation concluded that the reported dislocations with closed reductions and subsequent revision may be consistent with the massive abductor insufficiency, periprosthetic osteolysis, and/or pseudotumor; however, the clinical root cause of the massive abductor insufficiency, periprosthetic osteolysis, and pseudotumor cannot be confirmed.Besides, the prosthetic femoral head was found to be displaced posteriorly and superiorly.It cannot be concluded the reported events/clinical reactions were associated with a mal performance of the implants or an implants failure.All documents and images provided as of this date have been reviewed and considered and unless noted do not contribute to the clinical/medical investigation.A review of the production orders did not reveal a manufacturing abnormality that could have caused or contributed to the reported incident.For the femoral head, a review of complaint history revealed similar events for the listed device over the previous 12 months, but no similar events for the batch based on the historical data, this failure mode will be monitored for future complaints for any necessary corrective actions.For the acetabular cup and insert, a review of complaint history for the part numbers over the past 12 months and for the batch numbers based on historical data of the device did not reveal similar events for the listed devices.A review of the risk management files revealed this failure mode was previously identified.The anticipated risk level is still adequate.For the femoral head, a review of the instructions for use documents for total hip systems revealed that dislocation can occur as a result of improper neck selection, positioning, looseness of acetabular or femoral components, extraneous bone, penetration of the femoral prosthesis through the shat of the femur, fracture of the acetabulum, intrapelvic protrusion of acetabular component, femoral impingement, periarticular calcification, and/or excessive reaming.This has been identified as a warning and precaution.For the acetabular cup, a review of the instructions for use documents for birmingham hip resurfacing system revealed that dislocation has been identified in the potential benefits section as it is less common that with total hip replacement devices.For the insert, a review of the instructions for use documents for birmingham hip dual mobility insert revealed that dislocation or subluxation leading to post-operative joint instability (which may be caused by malpositioning of the implants, or muscle or fibrous tissue laxity) could occur.This has been identified as a potential adverse effect.A historical review concluded that there are no prior actions related to these products and event.At this time, we have no reason to suspect that the products failed to meet any specifications at the time of manufacture.Factors that could contribute to the reported event include traumatic injury, postoperative care or abnormal loading of limb.Based on this investigation, the need for corrective action is not indicated.Should the devices or additional information be received, the complaint will be reopened.No further investigation is warranted for this complaint; however, we will continue to monitor for future complaints and investigate as necessary.We consider this investigation closed.

• Brand Name: OXINIUM FEM HD 12/14 28MM +0
• Type of Device: PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/CERAMIC/POLYMER, CEMENTED OR NON-POROUS
• Manufacturer (Section D): SMITH & NEPHEW, INC.; 1450 brooks rd.; memphis TN 38116
• Manufacturer (Section G): SMITH & NEPHEW, INC.; 1450 brooks rd.; memphis TN 38116
• Manufacturer Contact: holly topping ; 7000 west william cannon drive; austin, TX 78735 ; 5123913905
• MDR Report Key: 17347756
• MDR Text Key: 319371734
• Report Number: 1020279-2023-01461
• Device Sequence Number: 1
• Product Code: LZO
• UDI-Device Identifier: 03596010474148
• UDI-Public: 03596010474148
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K021673
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,Company Representative
• Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date: 08/24/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Device Operator: Health Professional
• Device Model Number: 71342800
• Device Catalogue Number: 71342800
• Device Lot Number: 21CM20529
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Initial Date Manufacturer Received: 06/28/2023
• Initial Date FDA Received: 07/18/2023
• Supplement Dates Manufacturer Received: 08/23/2023
• Supplement Dates FDA Received: 08/24/2023
• Was Device Evaluated by Manufacturer?: No
• Date Device Manufactured: 03/25/2021
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Treatment: ACETAMINOPHEN, TYLENOL #4, LOTREL 5-20, GLUCOSAMIN
• Patient Outcome(s): Required Intervention
• Patient Age: 82 YR
• Patient Sex: Female