MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL HD ARTHROSCOPE/SINUSCOPE 4.0MM X 30 DEG X 167MM (MITEK LOCK)

Catalog Number 242018

Device Problem Device Contaminated During Manufacture or Shipping (2969)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Type  malfunction  

Event Description

It was reported by a healthcare professional that preoperatively to an unknown procedure on an unknown date, it was observed that the hd arthroscope/sinuscope 4.0mm x 30 deg x 167mm (mitek lock) device had residue/burn mark that could not be cleaned off.Another like device was used to complete the procedure.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: udi: (b)(4).H4: the device manufacture date is currently unavailable.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: h4: the device manufacture date was reported as unknown on the initial report; and has been updated accordingly.Investigation summary
=
> the complaint device is not being returned, therefore unavailable for a physical evaluation.Since the complaint device was not returned, we cannot determine a root cause for the reported failure.If additional information or the device is received in the future, we will reopen the complaint and perform the investigation as appropriate.A manufacturing record evaluation was performed for the finished device serial number (b)(6), and no non-conformances were identified.At this point in time, no corrective action is required, and no further action is warranted.However, depuy synthes mitek will continue to track any related complaints within this device family as a means of monitoring the extent with which this complaint is observed in the field.

• Brand Name: HD ARTHROSCOPE/SINUSCOPE 4.0MM X 30 DEG X 167MM (MITEK LOCK)
• Type of Device: ARTHROSCOPE
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer (Section G): MEDOS INTERNATIONAL SARL; chemin-blanc 38; le locle MA CH-24 00; SZ CH-2400
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 17444215
• MDR Text Key: 320238718
• Report Number: 1221934-2023-02904
• Device Sequence Number: 1
• Product Code: HRX
• UDI-Device Identifier: 10886705029150
• UDI-Public: 10886705029150
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K080560
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 242018
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 07/18/2023
• Initial Date FDA Received: 08/02/2023
• Supplement Dates Manufacturer Received: 09/06/2023
• Supplement Dates FDA Received: 09/06/2023
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Date Device Manufactured: 09/12/2022
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1