BOSTON SCIENTIFIC CORPORATION INTERLOCK-35; DEVICE, VASCULAR, FOR PROMOTING EMBOLIZATION
|
Back to Search Results |
|
Model Number 83787 |
Device Problem
Failure to Advance (2524)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 05/31/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
E1 initial reporter address 1: (b)(6).E1 initial reporter state: (b)(6).Device evaluated by mfr: the device was returned for analysis.Only the main coil returned for the analysis; and it was observed that the main coil was kinked, stretched and detached at the coil arm section.A part of the original box was returned, and it was observed that the pouch information matches with the complaint information.No more damages or issues were observed.Under the microscope it was observed that the main coil was kinked, stretched and detached at the coil arm section.Functional inspection test could not be performed due the pusher wire was not returned to this complaint.Dimensional inspection of the zap tip and primary coil outer diameter met specifications.However, the coil arm outer diameter failed to meet specification.
|
|
Event Description
|
Reportable based on device analysis completed on (b)(6) 2023.It was reported that the coil could not advance the catheter.The target lesion was located in the internal iliac artery.A 8mm x 20cm interlock.035 coil was selected for use.During the procedure, the physician successively deployed two 35 system coils of 12mmx40cm and 10x40, and then continued to deploy a 35 system coil of 8x20.However, this coil was stuck in the posterior section of the angiography catheter.The physician could not advance it after several attempts.Then, the coil was withdrawn, and the procedure was completed with another of the same device.There were no patient complications reported and the patient was stable post procedure.However, device analysis revealed that the coil detached at the arm section.
|
|
Search Alerts/Recalls
|
|
|