MAUDE Adverse Event Report: SANMINA -SCI SYSTEMS O-ARM O2 IMAGING SYSTEM; INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM

Model Number BI70002000

Device Problems Failure to Advance (2524); Adverse Event Without Identified Device or Use Problem (2993); Positioning Problem (3009); Application Program Freezes, Becomes Nonfunctional (4031)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 08/23/2023

Event Type  malfunction  

Event Description

Medtronic received information regarding an imaging system being used outside of a procedure.It was reported that during the radiation/fluoroscopy gain calibrations the system advanced forward to complete the extended calibration and then would not allow the site to move the gantry at all.The site rebooted the system and it did not allow them to progress to two dimensional mode, but the site was unsure if the system initialized fully or was prompting for a motion calibration.The site noted that the system was intermittently beeping and not allowing them to use any functionality.No patient present.

Manufacturer Narrative

H3) a manufacturer representative went to the site to test the imaging system.The field representative (rep) performed and cleared the error, "error while charging the load capacitors." the rep increased the filament data value by 5 and 10.An oscope was needed in order to continue troubleshooting.  codes: b01, c10, d02.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3) onsite functional and visual examination was performed by a manufacturer representative.The system was still not functional.More parts were order and are pending install.Some parts were replaced.The gantry cable chain was returned for analysis and found to be functioning as designed.A different gantry cable chain was returned for analysis and the component was found to be damaged during the install of the component.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3 - a manufacturer representative went to the site to service the system.Testing found there was an error while charging the load capacitors.There was a short circuit on the high voltage cables.The cable chain was replaced.Then there was an error initializing the collimator.A new 2dlf collimator was required.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3, h6) the system was serviced in the field and there were generator errors when attempting to shoot x-ray.The cable chain was faulty.Hardware parts were replaced.The system passed system checkout and was functioning as expected.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3) the rotor control box was returned for analysis.Functional testing determined that the rotor control box was malfunctioning causing the reported event.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

H3/h6: product bi71000366 (lot # av29305-5022 rev.B) was returned for analysis.Analysis determined that there were no failures.Codes b01, c19, and d14 apply.Product bi71000374 (lot # av67409-2020 rev.1) was returned for analysis.Analysis determined that there were no failures.Codes b01, c19, and d14 apply.Product bi71000444 (lot # r101920034 rev.4) was returned for analysis.Analysis determined that there were no failures.Codes b01, c19, and d14 apply.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: O-ARM O2 IMAGING SYSTEM
• Type of Device: INTERVENTIONAL FLUOROSCOPIC X-RAY SYSTEM
• Manufacturer (Section D): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer (Section G): SANMINA -SCI SYSTEMS; km 15.5 no. 29, plant 06; carr. chapala-guadalajara,jal 45640 ; MX 45640
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 17623572
• MDR Text Key: 322167097
• Report Number: 3006544299-2023-00540
• Device Sequence Number: 1
• Product Code: OWB
• UDI-Device Identifier: 00763000355555
• UDI-Public: 00763000355555
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K200074
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional
• Reporter Occupation: Biomedical Engineer
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date: 12/07/2023

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70002000
• Device Catalogue Number: BI70002000
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 08/23/2023
• Initial Date FDA Received: 08/25/2023
• Supplement Dates Manufacturer Received: 08/25/2023; 09/06/2023; 09/29/2023; 11/08/2023; 11/27/2023
• Supplement Dates FDA Received: 09/18/2023; 09/21/2023; 10/12/2023; 11/22/2023; 12/07/2023
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 01/29/2021
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1