|
Catalog Number PXB35-06-27-135 |
Device Problems
Difficult to Remove (1528); Device Dislodged or Dislocated (2923); Positioning Problem (3009)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 08/28/2023 |
Event Type
Injury
|
Event Description
|
Physician attempted to use a visipro balloon expandable stent with a 7x10cm non-medtronic sheath and a 0.035/260cm non-medtronic guidewire during treatment of a calcified lesion in the patient¿s left proximal renal artery.No vessel tortuosity reported.The lesion was moderate to heavy calcified left renal artery, diseased at proximal vessel and fairly straight segment.Embolic protection was not used.There was no damage noted to packaging (i.E.Shelf carton, hoop/tray).There were no issues noted when removing the device from the hoop/tray.The device did not pass through a previously-deployed stent.Resistance was encountered when advancing the device.It was reported on (b)(6) 2023, during an abdominal angiogram with planned renal artery stent placement, the visipro stent was unable to cross the lesion.During attempt to remove stent from the body, the balloon-mounted visipro stent slipped off the delivery system.After removing delivery system from the body, the physician attempted to use a 7fr 27-45mm non-medtronic snare to retrieve stent but it was unsuccessful.The snared stent was too big to remove through the sheath and the access was lost in order to remove the stent.A femoral artery cutdown and repair was performed.Patient was transferred to post-anaesthesia care unit in stable condition.On (b)(6) 2023, patient was brought back to cath lab and a brachial cutdown was performed.Angioplasty was performed using a pre-dilation 3.0x20mm non-medtronic balloon and a 5.0x28 non-medtronic coronary stent to renal artery, patient then was transferred back to unit in stable condition and discharged home on (b)(6) 2023 without any further complications or known procedures.
|
|
Manufacturer Narrative
|
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.
|
|
Manufacturer Narrative
|
Product analysis a deployed stent was returned without the delivery system.The returned stent was confirmed to be 27mm and the stent is flattened image analysis: the customer returned three videos.The videos show a procedure taking place.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
|
|
Search Alerts/Recalls
|
|
|