MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL OBT_BUTTON_4.0,167CW_MITEK; ACCESSORIES, ARTHROSCOPIC

Catalog Number 242258

Device Problems Device-Device Incompatibility (2919); Mechanical Jam (2983)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 09/26/2023

Event Type  malfunction  

Event Description

This is report 1 of 2 for (b)(4).It was reported by the sales rep that preoperatively to an unknown procedure on (b)(6) 2023, it was observed that the obturator with button top for 5.9mm sheath 167mm (mitek lock) device and the dual stopcock sheath 5.9mm x 30 deg x 167mm (mitek lock) device were sticking together.It was unknown if and how the procedure was completed.There were no adverse patient consequences nor surgical delay reported.No additional information was provided.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: udi: (b)(4).D4: the expiration date is currently unavailable.E3: reporter is a j&j sales representative.H4: the device manufacture date is currently unavailable.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: d9, h3, h6: the actual device has been returned and is currently pending evaluation.Once the investigation has been completed, a supplemental medwatch report will be submitted accordingly.

Manufacturer Narrative

This report is being submitted in pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by depuy mitek or its employees that the report constitutes an admission that the device, depuy mitek, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.H10 additional narrative: investigation summary
=
> the product was returned to mitek for evaluation.Mitek then conducted visual inspection of device received.Visual inspections revealed that the surface of the device and the tip shows wear marks indicating that heavily use.The obturator was tried to disassemble and assembled of the dual sheath, there was a resistance, and it was difficult to dissemble; the condition of the shaft might have contributed to this issue.Manufacturing record evaluation is not required as the reported event is not associated with the manufacturing process and/or the potential cause of the defect cannot be associated to manufacturing.Based on the visual inspection of the device, this complaint can be confirmed.The possible root cause for the reported failure can be related when the device might have been dropped or device was tapped against a hard surface accidentally, as well as rough use by the user; moreover, this failure reported can be related to the wear and tear of the device.As per ifu, do not use a damaged or defective endoscope.Inspect the endoscope prior to each examination or procedure and before sterilization based on the instructions in this document; it is important to check the shaft for bending, scratches, dents, corrosion, pitting, or other surface irregularities.Do not hold the endoscope by its shaft; this may cause damage and do not bend the endoscope or subject the endoscope to impact.At this point in time, no corrective action is required, and no further action is warranted.However, in depuy synthes mitek, additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post market surveillance.

• Brand Name: OBT_BUTTON_4.0,167CW_MITEK
• Type of Device: ACCESSORIES, ARTHROSCOPIC
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer (Section G): MEDOS INTERNATIONAL SARL; chemin-blanc 38; le locle CH-24 00; SZ CH-2400
• Manufacturer Contact: kate karberg ; 325 paramount drive; raynham, MA 02767 ; 3035526892
• MDR Report Key: 17907604
• MDR Text Key: 326047958
• Report Number: 1221934-2023-03671
• Device Sequence Number: 1
• Product Code: NBH
• UDI-Device Identifier: 10886705029174
• UDI-Public: 10886705029174
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: EXEMPT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility,Company Representative
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 242258
• Device Lot Number: 1534808
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 09/26/2023
• Initial Date FDA Received: 10/10/2023
• Supplement Dates Manufacturer Received: 10/25/2023; 11/20/2023
• Supplement Dates FDA Received: 10/26/2023; 11/21/2023
• Was Device Evaluated by Manufacturer?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1