Catalog Number 412012 |
Device Problems
Contamination /Decontamination Problem (2895); Device-Device Incompatibility (2919)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/30/2023 |
Event Type
malfunction
|
Event Description
|
As reported by the user facility: during 100% black/white box visual inspection on (b)(6) 2023 pharmacist found one bag to have a white floating particle inside.Drug had been added to the bag.Per batch record instruction the mini spike is changed about every 20 spikes.We tested a few spikes into the stopper after compounding and did notice visible markings on the spike after withdrawal from the vial.No injury reported.
|
|
Manufacturer Narrative
|
This report has been identified as b.Braun medical internal report number (b)(4).The investigation is ongoing at this time.A follow up will be submitted when the investigation results become available.
|
|
Manufacturer Narrative
|
One (1) used sample without packaging was returned for investigation.Additionally, four (4) photographs were returned for evaluation.The returned photographs were subject to a visual evaluation.Photographs #1 and #4 provided information identifying a drug vial with no conclusions to be made.Photograph #2 is identified as a dispensing pin with no defect able to be identified.In photograph #3 a white particulate was observed on top of the drug vial.The exact determination of where this particulate came from cannot be concluded.The returned sample was subjected to a visual examination.No foreign matter or product coring is located on the dispensing pin.The sample was spiked multiple times into a vial with no abnormalities detected.Although no defect was able to be identified on the physical sample, through evaluation of the photograph the white particulate can be seen and therefore the defect is confirmed.A review of the discrepancy management system (dsms) database was performed for the reported lot number and no abnormalities or non-conformances were noted during the in process or final product inspection.No defect can be concluded on the sample returned from the customer however white particulate can be identified in the picture provided.The exact root cause cannot be determined at this time.
|
|
Search Alerts/Recalls
|