MAUDE Adverse Event Report: C.R. BARD, INC. (COVINGTON) -1018233 BARD® X-FORCE® NEPHROSTOMY BALLOON DILATION CATHETER

Catalog Number 995081

Device Problem Burst Container or Vessel (1074)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 11/06/2023

Event Type  malfunction  

Manufacturer Narrative

The investigation is still in progress.Once the investigation is complete a supplemental report will be filed.H11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.

Event Description

It was reported that the nephrostomy balloon dilation catheter rupture occurred during intraoperative use.Per follow up on 11nov2023, customer stated that the balloon ruptured 0.5 cm at the anterior end.

Manufacturer Narrative

The reported event is confirmed cause unknown.Visual evaluation noted the sample was received in a closed ziploc bag identified with a biohazard label and sterilized by eo label; the bag was handwritten the customer complaint.Inside of the bag there was a pouch with the unit label.Inside of the pouch there is the balloon catheter.The balloon hub of the catheter reads "8 x 15 cm" and "30 atm"; the wire hub reads "0.038 (.97mm) wire" the sample was evaluated in the bio testing lab.Visual inspection was performed to the catheter, and it was identified a burst in the shaft in the distal end of the catheter.The burst is located close to the proximal bond of the balloon.Although an exact root cause could not be determined a potential root cause could be user not trained on appropriate technique and use of device, unfamiliar with rbp of device.The device history record was reviewed and found nothing that could have caused or contributed to the reported event.The instructions for use were found adequate and state the following: "instructions for use: caution: federal (u.S.A.) law restricts this device to sale by or on the order of a physician.Description the x-force® nephrostomy balloon dilation catheter is a dual lumen catheter with a 24 (8mm) or 30fr (10mm) balloon mounted on the distal tip.It has a radiopaque tip and a radiopaque marker beneath the balloon.The lumen labeled with rated burst pressure (xx atm) is for balloon inflation.The other lumen allows the catheter to track over a 0.038¿ (.97mm) diameter guidewire and can be used for monitoring of pressure or the infusion of medication and/or contrast medium.Each balloon inflates to a stated diameter and length at a specific pressure ¿ typically at 10 atm.The balloon dilation catheter comes packaged with a refolding tool and a working sheath.It is available with or without an inflation device.It comes sterile and is for single use only.Indications for use the x-force® nephrostomy balloon dilation catheter is recommended for use in the dilation of the nephrostomy tract and for placement of the working sheath.Contraindications do not use the x-force® nephrostomy balloon dilation catheter in the presence of conditions which create unacceptable risk during the dilation of the nephrostomy tract.Warnings: ¿ if resistance is felt when removing either the catheter or the guidewire from the working sheath, stop and consider removing them as a single unit to prevent damage to the product.Applying excessive force to the catheter can result in tip breakage or balloon separation.¿ do not use air or any gaseous substances as a balloon inflation media, always use sterile liquid media.¿ this is a single use device.Do not re-sterilize any portion of this device.Reuse and/or repackaging may create a risk of patient or user infection, compromise the structural integrity and/or essential material and design characteristics of the device, which may lead to device failure, and/or lead to injury, illness or death of the patient.Precautions: ¿ only a physician who has an understanding of the clinical applications, technical principles and associated.Risks associated with balloon dilation of the nephrostomy tract should use this device.¿ after use, this product may be a potential biohazard.Handle and dispose of in accordance with accepted.Medical practice and with applicable laws and regulations.Potential complications: the complications that may arise from a balloon dilation procedure include tissue trauma and perforation.Inspection prior to use: the x-force® nephrostomy balloon dilation catheter is a sterile, single use device.Carefully inspect the catheter and the sterile packaging for signs of damage that may have occurred during shipment.Do not use the product if damage is evident.Preparation of the catheter all x-force® nephrostomy balloon dilation catheters contain air in the balloon lumen.The air must be removed.To allow liquid to fill the balloon when it is inflated.1.Remove the protective sheath from the balloon.2.Attach the inflation device to the connector on the balloon lumen.3.Open the stopcock, and draw back on the inflation device to remove the air from the balloon catheter.4.Close the stopcock, remove the inflation device, depress the plunger to remove any air and reattach to the balloon catheter.5.Repeat steps 3-4 until all air is removed from the balloon lumen.Catheter insertion: 1.Prior to insertion, place the working sheath over the balloon and position it proximal to the balloon.Note: dilation procedures should be conducted under fluoroscopic guidance with appropriate x-ray equipment or direct vision.2.Introduce the catheter carefully over a 0.038¿ (.97mm) guidewire and place it in the area that needs to be dilated.Use the radiopaque marker to aid in proper positioning.Caution: do not advance or withdraw the catheter or guidewire against any significant resistance.The cause of the resistance must be determined fluoroscopically and remedial action taken.Caution: do not exceed the recommended rated burst pressure (rbp) for this device.Balloon rupture may occur if the rbp rating is exceeded.Please refer to the device label for the recommended rbp." h11: section a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : the actual/suspected device was inspected.

Event Description

It was reported that the nephrostomy balloon dilation catheter rupture occurred during intraoperative use.Per follow up on (b)(6) 2023, customer stated that the balloon ruptured 0.5 cm at the anterior end.

• Brand Name: BARD® X-FORCE® NEPHROSTOMY BALLOON DILATION CATHETER
• Type of Device: DILATION CATHETER
• Manufacturer (Section D): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer (Section G): C.R. BARD, INC. (COVINGTON) -1018233; 8195 industrial blvd; covington 30014
• Manufacturer Contact: xeeroy rada ; 8195 industrial blvd; covington 30014 ; 7707846100
• MDR Report Key: 18208695
• MDR Text Key: 328996252
• Report Number: 1018233-2023-08472
• Device Sequence Number: 1
• Product Code: LJE
• Combination Product (y/n): N
• Reporter Country Code: CH
• PMA/PMN Number: K063632
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Other,Company Representative
• Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date: 02/08/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Catalogue Number: 995081
• Device Lot Number: BMGXFM28
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/06/2023
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 11/06/2023
• Initial Date FDA Received: 11/27/2023
• Supplement Dates Manufacturer Received: 02/09/2024
• Supplement Dates FDA Received: 02/09/2024
• Was Device Evaluated by Manufacturer?: Yes
• Date Device Manufactured: 11/02/2022
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1
• Patient Outcome(s): Other