• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ST PAUL DELTEC GRIPPER PLUS NEEDLES; SET, ADMINISTRATION, INTRAVASCULAR

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ST PAUL DELTEC GRIPPER PLUS NEEDLES; SET, ADMINISTRATION, INTRAVASCULAR Back to Search Results
Catalog Number 21-2767-24
Device Problems Fluid/Blood Leak (1250); Loose or Intermittent Connection (1371)
Patient Problem Insufficient Information (4580)
Event Date 04/03/2023
Event Type  malfunction  
Event Description
It was reported that the needle was "too high above the level of the children's skin after being punctured, which caused accidental hits and the catheters became loose".There was extravasation of serum therapy in several patients.The needle bent inside the catheter, causing harm to patients.There was patient involved, but it is unknown the exact quantity and reported harm.It was unknown if there was any medical intervention or treatment.
 
Manufacturer Narrative
Other text: d3, g1,2 email is: (b)(6).Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional reportable information becomes available.
 
Manufacturer Narrative
Evaluation codes: email is: (b)(6).Three (3) photos were provided by the customer which were used to conduct the device analysis since the physical unit, by the time this investigation is being documented, has not been received.Results: photo one shows a top view of the needle base where the needle is observed to be bent towards the front of the base, the unit is observed to be used and blood traces are in the tubing.Photo two shows a bottom view of the base of the needle where the needle is observed to be bent at the edge of the base toward the front end.Photo three shows a side view of the base where the needle is observed to be bent towards the front and the foam is observed to be compressed due to the bent needle.The complaint was confirmed.No product has been received to conduct a functional test.The root cause is unknown.Without the return of the involved sample a comprehensive failure investigation cannot be performed, and a cause cannot be determined.A device history record (dhr) review reported no discrepancies or non-conformances during the manufacturing of the reported lot number.If the device arrives, the manufacturer will reopen this complaint for further device analysis and investigation.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
DELTEC GRIPPER PLUS NEEDLES
Type of Device
SET, ADMINISTRATION, INTRAVASCULAR
Manufacturer (Section D)
ST PAUL
1265 grey fox rd.
st. paul MN 55112
Manufacturer (Section G)
NULL
Manufacturer Contact
reed covert
MDR Report Key18240592
MDR Text Key329400486
Report Number3012307300-2023-10883
Device Sequence Number1
Product Code FPA
UDI-Device Identifier10610586025600
UDI-Public10610586025600
Combination Product (y/n)N
Reporter Country CodeBR
PMA/PMN Number
K021999
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Distributor
Reporter Occupation Other Health Care Professional
Type of Report Initial,Followup
Report Date 02/22/2024
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue Number21-2767-24
Device Lot Number4235303
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 04/06/2023
Initial Date FDA Received11/30/2023
Supplement Dates Manufacturer Received01/23/2024
Supplement Dates FDA Received02/22/2024
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Date Device Manufactured01/20/2022
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
-
-