BIOSENSE WEBSTER INC LASSOSTAR NAV CIRCULAR MAPPING CATHETER; CATHETER, ELECTRODE RECORDING, OR PROBE, ELECTRODE RECORDING
|
Back to Search Results |
|
Catalog Number D140402 |
Device Problem
Insufficient Information (3190)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 07/19/2023 |
Event Type
malfunction
|
Event Description
|
It was reported that a patient underwent a procedure with a lassostar nav circular mapping catheter for which biosense webster¿s product analysis lab (pal) identified damage on an electrode (partially separated from the tip) and shaft on the loop broken with internal wires exposed.The lassostar nav circular mapping catheter got a defect during pulling it out from the patient.There was no fragment generated during the case.The procedure was completed successfully.No patient consequence.Additional information was received on the event.The lassostar nav circular mapping catheter was not switched.They tried to pull out the lassostar nav circular mapping catheter from the balloon because contrast medium delivery was not possible.When the lassostar nav circular mapping catheter was pulled out, a lassostar nav circular mapping catheter defect probably occurred due to the tightening.The biosense webster, inc.Product analysis lab received the device for evaluation and per the evaluation completion on 07-nov-2023, kinks were observed along the shaft, damage on one of the electrodes (partially separated from the tip) and the shaft on the loop was observed broken with internal wires exposed.This event was originally considered non-reportable, however, bwi became aware of the damage on an electrode (partially separated from the tip) and shaft on the loop broken with internal wires exposed on 07-nov-2023 and have assessed these returned conditions as reportable.
|
|
Manufacturer Narrative
|
The device evaluation was completed on 07-nov-2023.The product was returned to biosense webster for evaluation.Bwi conducted a visual inspection, magnetic sensor functionality test of the returned device.The device was inspected.Kinks were observed along the shaft, damage on one of the electrodes (partially separated from the tip) and the shaft on the loop was observed broken with internal wires exposed.The magnetic sensor functionality was tested on carto and the device failed.Error 116 was observed on the system due to an open circuit on the tip area.That could have been caused by the physical damage to the device.A magnetic issue was confirmed.It should be noted that product failure is multifactorial.The instructions for use contain the following recommendations: improperly positioned patches may increase the chances of a virtual magnetic reference move which is unrelated to patient movement.This could also result in inaccurate catheter visualization.In the carto 3 system manual: the magnetic sensor of the catheter is disconnected.If the problem persists, replace the catheter cable or the catheter.A manufacturing record evaluation was performed for the finished device number lot and no internal actions related to the complaint were found during the review.As part of biosense webster's quality process, all devices are manufactured, inspected, and released to approved specifications.This product issue will be addressed through bwi's quality system.Explanation of codes: -investigation findings: mechanical problem identified (c07) / investigation conclusions: unintended use error caused or contributed to event (d1102) / component code: rod/shaft (g04112) were selected as related to the biosense webster inc.Analysis finding of the ¿kinks were observed along the shaft¿ and the customer¿s reported ¿catheter got defect during pulling it out from the patient¿.-investigation findings: mechanical problem identified (c07) / investigation conclusions: unintended use error caused or contributed to event (d1102) / component code: tip (g04129) were selected as related to the biosense webster inc.Analysis finding of the ¿shaft on the loop was observed broken with internal wires exposed¿ and the customer¿s reported ¿catheter got defect during pulling it out from the patient¿.-investigation findings: stress problem identified (c0706) / investigation conclusions: unintended use error caused or contributed to event (d1102) / component code: electrode (g0201501) were selected as related to the biosense webster inc.Analysis finding of the ¿damage on electrode¿ and the customer¿s reported ¿catheter got defect during pulling it out from the patient¿.-investigation findings: open circuit (c0205) / investigation conclusions: unintended use error caused or contributed to event (d1102) / component code: sensor (g03012) were selected as related to the biosense webster inc.Analysis finding of the ¿open circuit on the tip area¿ and the customer¿s reported ¿catheter got defect during pulling it out from the patient¿.Manufacturer's reference number: (b)(4).
|
|
Search Alerts/Recalls
|
|
|