• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: STRYKER GMBH PRESS-FIT HUMERAL STEM 13MM; PROSTHESIS, SHOULDER, SEMI-CONSTRAINED, METAL/POLYMER CEMENTED

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

STRYKER GMBH PRESS-FIT HUMERAL STEM 13MM; PROSTHESIS, SHOULDER, SEMI-CONSTRAINED, METAL/POLYMER CEMENTED Back to Search Results
Catalog Number 5567-P-3013
Device Problem Adverse Event Without Identified Device or Use Problem (2993)
Patient Problems Osteopenia/ Osteoporosis (2651); Limb Fracture (4518)
Event Date 12/03/2020
Event Type  Injury  
Manufacturer Narrative
Based on the available information the device will not be returned therefore an evaluation of the device cannot be performed.A review of the device history is not possible because the lot number was not communicated.Should additional information become available, it will be provided in a supplemental report.H3 other text : device disposition is unknown.
 
Event Description
As reported: "intraoperative fracture of the humerus.Event was resolved without sequelae (without additional medical intervention).".
 
Event Description
As reported: "intraoperative fracture of the humerus.Event was resolved without sequelae (without additional medical intervention).".
 
Manufacturer Narrative
Please note corrections to sections b2 and h6 (method, results, and conclusion codes).The reported event could be confirmed based on the x-rays inspected.The device was not returned for inspection.However, post-operative x-rays were received.The reported event could be confirmed as the humeral fracture is clearly visible.The x-rays received give indication of osteopenic bone, which could be a direct cause of the humeral fracture.Although medical error and forced fracture during the implantation could not be excluded, this could not be confirmed either since it was not possible to determine exactly when during the procedure the bone was fractured.The images received were reviewed by a medical expert, who stated: "the x-rays show a reunion reverse total shoulder arthroplasty which is positioned well.The x-rays may give the impression that the bone is osteopenic, however this are not medical grade images.The x-ray shows a fracture fragment that is a part of the greater tuberosity.I cannot assess when in the procedure this avulsion happened, it may have been (1) avulsed during humeral head dislocation, or (2) pre-damaged by the humeral head resection, or later in the procedure during (3) opening of the medullary canal or even (4) with the broaches.Obviously, in (1) and (2) neither instrument nor the device are involved.(3) and (4) would be most likely surgical technique related.Above all, the alleged poor bone quality related to all 4 phases described above.Please note that avulsion also may have happened while reducing the joint with the final implant in place, since there is a fair amount of humeral distalization in this case with the use of a thick tray." based on investigation, the root cause was attributed to a bone condition related issue.The osteopenia observed on the patient's bone could be identified as a cause of the fracture.A review of the device history was not possible because the lot number was not communicated.No corrective actions are required at this time.A review of the labeling did not indicate any abnormalities.Indications of material, manufacturing, or design related problems were unable to be identified as the lot number was not communicated.If the device is returned or if any additional information is provided, the investigation will be reassessed.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
PRESS-FIT HUMERAL STEM 13MM
Type of Device
PROSTHESIS, SHOULDER, SEMI-CONSTRAINED, METAL/POLYMER CEMENTED
Manufacturer (Section D)
STRYKER GMBH
bohnackerweg 1
postfach
selzach 2545
SZ  2545
Manufacturer (Section G)
STRYKER ORTHOPAEDICS-MAHWAH
325 corporate drive
mahwah NJ 07430
Manufacturer Contact
anna jusinski
325 corporate drive
mahwah, NJ 07430
2018315000
MDR Report Key18387030
MDR Text Key331284163
Report Number0008031020-2023-00440
Device Sequence Number1
Product Code KWS
UDI-Device Identifier07613327424973
UDI-Public07613327424973
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K202289
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Company Representative
Reporter Occupation Other
Type of Report Initial,Followup
Report Date 04/08/2024
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Catalogue Number5567-P-3013
Device Lot NumberUNKNOWN
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? No
Initial Date Manufacturer Received 12/04/2023
Initial Date FDA Received12/22/2023
Supplement Dates Manufacturer Received03/13/2024
Supplement Dates FDA Received04/08/2024
Was Device Evaluated by Manufacturer? Device Not Returned to Manufacturer
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Other; Required Intervention;
Patient Age68 YR
Patient SexFemale
Patient Weight95 KG
-
-