LIVANOVA DEUTSCHLAND CENTRIFUGAL PUMP 5 (CP5); CONTROL, PUMP SPEED, CARDIOPULMONARY BYPASS
|
Back to Search Results |
|
Model Number 60-02-60 |
Device Problem
Pumping Stopped (1503)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 11/02/2023 |
Event Type
malfunction
|
Event Description
|
Livanova deutschland received a report that a centrifugal pump 5 (cp5) gave motor controller centrifugal pump 1 failure message at setup.There was no patient involvement.
|
|
Manufacturer Narrative
|
A.1.-a.5.There was no patient involvement.H10: livanova deutschland manufactures the centrifugal pump 5 (cp5).The incident occurred in matsudo city, japan.Livanova initiated an investigation.This report was due on december 02, 2023; however, due to a network disruption at livanova, the ability to submit mdrs was lost on (b)(6) 2023, before this report was ready to submit.The report was prepared and submitted immediately following restoration of the livanova systems.If any additional information pertinent to the reported event is received, it will be provided in a supplemental report.
|
|
Event Description
|
See initial report.
|
|
Manufacturer Narrative
|
H10: the unit was manufactured in 2015 and according to the analysis of the complaints database no similar events have been reported in the past.No service activity has been scheduled yet for this device.However, based on livanova knowledge the most likely error code associated to motor control failure on cp5 drive unit is the error code 458.The error code (458) can be due to a failure in the internal can communication between the computer board hkr (located in the cp5 control panel) and the motor control board hms (located in the drive unit).Based on the current level of information, the most likely root causes of the reported malfunction could be the following: - defective computer board (hkr); - defective motor control board (hms); - an incorrect connection between the cp5 drive unit and the cp5 control panel, which has led to a disconnection of the drive unit cable from the panel, resulting in a motor control failure.If service activity will be performed on this device or any additional information is received, a follow up on final report will be submitted.
|
|
Search Alerts/Recalls
|
|
|