Getinge became aware of an issue with one of surgical lights - powerled 700.It was stated the oil was leaking from the light.We decided to report the issue in abundance of caution as any liquid falling off into sterile field or during procedure may cause contamination.It was established that when the event occurred, the surgical light did not meet its specification due to oil leakage from powerled surgical light, which contributed to the event.Provided information does not indicate if upon the event occurrence, the device was or was not being used for patient treatment.During the investigation, it was found that in the past the reported scenario has never led to serious injury nor death.Comparing the number of involved devices to the install base, we conclude that the failure ratio for the allegation of liquid leakage is low.As stated by the subject matter expert at the manufacturer¿s site, during the assembly of spring arms the supplier applies a creamed grease.Such creamed grease is turning into liquid only above 135°c.So, the black dripping liquid observed, therefore, cannot come from the spring arm itself but finds its origin elsewhere.The first likely cause is a combination of air conditioning and an excess of oil at the bushing location between the spring arm and the main arm and according to the latest technical investigations carried out in august 2020 at maquet sas the second probable root cause would be an excess of cleaning product in the lower part of the spring arm, applied in spray or with a sponge, but not in compliance with the recommendations given in our user manual.Getinge shall continue to monitor for any further events of this nature and do not propose any further action at this time.The correction of h3a device evaluated by manufacturer, h3b device not eval provide code, h3c if other provide code - explain fields deems required.This is based on the internal evaluation.Previous h3a device evaluated by manufacturer: no corrected h3a device evaluated by manufacturer: yes previous h3b device not eval provide code: other corrected h3b device not eval provide code: n/a.
|