Catalog Number 152190058 |
Device Problem
Device Dislodged or Dislocated (2923)
|
Patient Problems
Adhesion(s) (1695); Foreign Body Reaction (1868); Hypersensitivity/Allergic reaction (1907); Joint Dislocation (2374); Joint Laxity (4526)
|
Event Type
Injury
|
Event Description
|
It was reported that on (b)(6) 2013, the patient underwent the primary surgery via tha for oa for the right hip joint with the implants in question.The surgeon informed the sales rep that the patient had been hospitalized since late last year due to an anterior dislocation.The surgeon performed an mri scan, which confirmed the suspicion of trunnionosis.Revision surgery is scheduled for (b)(6), 2024.In addition, the cup used for the primary surgery was a competitor's.No further information is available.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.H10 additional narrative: if information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
Additional information was received: revision surgery was performed on january 17th.The surgeon left the sleeve in the body without replacing it and replaced the stem with a "18x13 36+8lat" and the head with a "delta28-3." a "constraint liner" was used for the cup liner.Comments from the surgeons are as follows.Intraoperative findings at the time of revision revealed extensive gray tumor-like tissue around the hip, which was removed.The midline muscle was not attached to the greater trochanter and the joint was loose.The extraction implant (stem/head) was checked, and a black corrosion adhesion was observed at the joint.In contrast, no evidence of corrosion was observed at the stem/sleeve joint.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).Investigation summary : according to the information received, it was reported that on (b)(6) 2013, the patient underwent the primary surgery via tha for oa for the right hip joint with the implants in question.The surgeon informed the sales rep that the patient had been hospitalized since late last year due to an anterior dislocation.The surgeon performed an mri scan, which confirmed the suspicion of trunnionosis.Revision surgery is scheduled for (b)(6) 2024.In addition, the cup used for the primary surgery was a zimmerbiomet continuum.The product was not returned to depuy synthes, however photos were provided for review.(b)(4).The x-ray investigation does not reveal any damage to the device 9/10 cocr head 28mm +0.No dislocation between the head and the liner is observed.With the information provided, it cannot be concluded that there is any type of corrosion in the implants.Therefore, the condition of the complaint cannot be confirmed.Since the device was not returned, a dimensional inspection cannot be performed.The overall complaint was unconfirmed as the observed condition of the 9/10 cocr head 28mm +0 would not contribute to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot : a manufacturing record evaluation were performed for the finished device 152190058, lot number d12062303, it was manufactured on 29-jun-2012.41pcs parts were manufactured per specification and all raw materials met specification, and no non-conformances were identified.
|
|
Search Alerts/Recalls
|
|