|
Catalog Number CQF7586 |
Device Problems
Break (1069); Leak/Splash (1354); Material Split, Cut or Torn (4008)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 12/20/2023 |
Event Type
malfunction
|
Manufacturer Narrative
|
H10: as the lot number for the device was provided, a review of the device history records is currently being performed.The device has been returned to the manufacturer for evaluation.The investigation of the reported event is currently underway.H10: d4: (expiration date: 02/2026).H11: section a: through f: the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
|
|
Event Description
|
It was reported that prior to an angioplasty procedure, the pta balloon shaft was allegedly broken near the distal plastic hub.The procedure was completed using another device.There was no patient contact.
|
|
Manufacturer Narrative
|
H10: the file was reassessed for reportability and determined to be no longer reportable.Since an initial mdr was submitted, therefore, the file will remain assessed as a malfunction.H10: d4 (expiration date: 02/2026), g3 h11: h6 (device) h11: section a through f ¿ the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
|
|
Event Description
|
It was reported that prior to an angioplasty procedure, the pta balloon shaft was allegedly broken near the distal plastic hub.The procedure was completed using another device.There was no patient contact.
|
|
Event Description
|
It was reported that prior to an angioplasty procedure in an arteriovenous fistula, the loss of liquids allegedly occurred from the small external connection with the manometric gun.The procedure was completed using another device.There was no patient contact.
|
|
Manufacturer Narrative
|
H10: additional information was received, and the file was reassessed for reportability and determined to be reportable as malfunction.H10: manufacturing review: a manufacturing review was not required as this is the only complaint reported to date for this product and lot.Investigation summary: one conquest 40 pta dilatation catheter was received for evaluation.During visual analysis a partial circumferential tear was observed near to the distal end of the inflation lumen.Further the same inflation lumen tear observed in the microscopic analysis.Due to the nature of complaint further functional testing was not performed.However during the visual and microscopic analysis, the inflation lumen tear could be identified.Therefore, the investigation was confirmed for the identified inflation lumen tear and reported leak issue.During visual analysis observed inflation lumen tear could have been the cause for the reported leak issue.However, a definitive root cause for the identified inflation lumen tear and reported leak issue could not be determined based upon the provided information.Labeling review: as the reported event did not allege a labeling or use related issue, a labeling review is not required.H10: d4 (expiration date: 02/2026), g3, h2, h6 (device, method).H11: b5, h6 (result, conclusion).H11: section a through f ¿ the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.H3 other text : see h10.
|
|
Search Alerts/Recalls
|
|
|