|
Catalog Number MCS20 |
Device Problem
Failure to Form Staple (2579)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/01/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).Date sent: 1/26/2024.D4: batch # unk.Additional information was requested and the following was obtained: ""is the current patient status known? no.To the best of my knowledge, the patient status is currently fine." attempts are being made to obtain the following information.To date no response has been provided.If further details are received at a later date a supplemental medwatch will be sent: "did the clip not form completely or form a pear/tear drop shape, clip gap? did the clip legs not close parallel or cross? this may also include ribbon shaped or x-shaped.Did the clip not stay in place or fall off after being applied on a vessel or tissue.? (does not eclude.) did the clip cut the vessel or tissue? did bleeding occur? if so how was it addressed? were there any modifications to the procedure or patient post op care?" attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
It was reported that during an unknown procedure, the "clip" would not fully engage, and then would not fully disengage, causing damage to patient.At this time, the damage/injury does not appear severe.
|
|
Manufacturer Narrative
|
(b)(4).Date sent: 2/22/2024.D4: batch # unk.Additional information was requested and the following was obtained: "did the clip not form completely or form a pear/tear drop shape, clip gap? based on the information provided, to my understand the clip ¿hung up¿ in transition of use.Did the clip legs not close parallel or cross? ?this may also include ribbon shaped or x-shaped.Not familiar with this question.I do not have information to provide.Did the clip not stay in place or fall off after being applied on a vessel or tissue.? (does not eclude.) to the information i have, the clip failed to engage properly.Resulting in minor damage to patient.Did the clip cut the vessel or tissue? unable to answer this at this time.Did bleeding occur? if so how was it addressed? unable to answer this at this time.Were there any modifications to the procedure or patient post op care? based on the information provided to me, another product was used in place of to complete said operation." investigation summary: the product was returned to ethicon for evaluation.Visual inspection and functional testing were conducted on the returned device.Visual analysis of the returned sample revealed that the mcs20 device was returned inside it's original packaging unopened with a clip in jaws and with no apparent damage.In an attempt to replicate the reported incident, the device was tested for functionality.Upon testing, the device was cycled and it fed and formed the remaining twenty(20) clips as intended.Although no conclusion could be reach on the cause of the reported event, the instructions for use do contain the following caution: ensure that a clip is in the jaws.Position the jaws so that the clip completely surrounds the vessel to be ligated.Fully squeeze the handles together until they stop.As the handles are squeezed, the clip closes and occludes the vessel or tubular structure.Fully release the handles to return the instrument to its original open position.The next clip is automatically advanced.Inspect the jaws after each clip application to ensure the presence of a new clip before applying the next clip.Repeat steps as necessary to continue ligation of tissue.For optimal performance, periodically clean the instrument during the procedure by submerging the jaw and distal end of the applier shaft in saline.The event described could not be confirmed as the device performed without any difficulties noted.A manufacturing record evaluation was performed for the finished device batch a9dw1n number, and no non-conformances were identified.
|
|
Search Alerts/Recalls
|
|
|