MAUDE Adverse Event Report: MEDTRONIC XOMED INC. XPS® BUR - UNKNOWN; BUR, EAR, NOSE AND THROAT

Model Number XOM UNK BUR

Device Problem Mechanical Jam (2983)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 12/14/2023

Event Type  malfunction  

Event Description

It was reported that during central cleaning, the bur was stuck inside the m5 handpiece.There was no patient impact.As per service report it was mentioned that blade was stuck in the m5 handpiece, which was not intact.

Manufacturer Narrative

H3: medtronic evaluated that visually, there were scratches and indentions on the inner shaft that were consistent with tool marks and the inner spiral wrap was overstretched past the proximal end of the outer hub.There was no damage to the distal tip, but the distal outside diameter of the inner hub was deformed.The outside diameter of the inner hub shall be 0.330 ± 0.002 inches and measured 0.328 inches in the undamaged area and up to 0.348 inches in the deformed area which was out of specification.The inner and outer hub bushings had traces of wear.Functional testing could not be performed due to the broken state of the device.In the returned condition, there was an out of specification condition that was related to the complaint (due to physical damage).Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Manufacturer Narrative

Previously applied fdm b02 and fdc d02 codes no longer applicable.Additional information received shows that there is no information to reasonably suggest that the device in this report may have caused or contributed to a death or serious injury or that the device in this report has malfunctioned.Therefore, this event did not and does not meet the reporting requirements stipulated in 21 cfr 803.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

• Brand Name: XPS® BUR - UNKNOWN
• Type of Device: BUR, EAR, NOSE AND THROAT
• Manufacturer (Section D): MEDTRONIC XOMED INC.; 6743 southpoint dr n; jacksonville FL 32216
• Manufacturer (Section G): MEDTRONIC XOMED INC.; 6743 southpoint dr n; jacksonville FL 32216
• Manufacturer Contact: glen belmer ; 6743 southpoint drive north; jacksonville, FL 32216 ; 6122713209
• MDR Report Key: 18728507
• MDR Text Key: 336625040
• Report Number: 1045254-2024-00228
• Device Sequence Number: 1
• Product Code: EQJ
• Combination Product (y/n): N
• Reporter Country Code: US
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Health Professional,User Facility
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date: 03/01/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: XOM UNK BUR
• Device Catalogue Number: XOM UNK BUR
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 01/29/2024
• Is the Reporter a Health Professional?: Yes
• Initial Date Manufacturer Received: 01/22/2024
• Initial Date FDA Received: 02/18/2024
• Supplement Dates Manufacturer Received: 02/26/2024
• Supplement Dates FDA Received: 02/29/2024
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: Yes
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Initial
• Patient Sequence Number: 1