Catalog Number 136532730 |
Device Problems
Device Dislodged or Dislocated (2923); Noise, Audible (3273)
|
Patient Problems
Foreign Body Reaction (1868); Pain (1994); Joint Dislocation (2374); Unspecified Musculoskeletal problem (4535)
|
Event Date 12/19/2023 |
Event Type
Injury
|
Event Description
|
Hcp reported two consecutive revisions of hip pe-inlays.This complaint is about the second revision.Patient was lifting heavy cement bags and had pain and squeaking in left hip.Xrays show hip head is off center and suspect dislocation.During the revision, osteophytes along the ¿socket edge¿ were identified along with metallosis, a head/liner dislocation and fractured inlay.Doi: (b)(6) 2023.Dor: (b)(6) 2023.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).Investigation summary : according to the information received, "hcp reported two consecutive revisions of hip pe-inlays.This complaint is about the second revision".The product was not returned to depuy synthes, however x-rays were provided for review.See attachments ((b)(4) x-rays).The x-ray investigation revealed that the dlt ts cer hd 12/14 32mm +9 was not properly centered at implant site.This type of condition may happen due to a dissociation between altrx neut 32idx48od and unknown hip acetabular cup, confirming a possible audible sound.Surgical technique pinnacle ® hip solutions pages 11-12 indicate that "the targeted shell abduction (as measured on radiographs) should be 40-45 degrees taking into account local soft tissue and anatomic landmarks", and "the targeted shell anteversion (as measured on radiographs) should be 15-20 degrees taking into account local soft tissue and anatomic landmarks".Abduction angle of 53 degrees, showed on evidence, confirms a dissociation on liner and cup/shell, suggesting a future fracture or dislocation.However, since quality of x-rays reviewed are poor, no observations pertaining to the nature of the reported event could be identified.Therefore, neither allegation could be confirmed.Since the device was not returned, a dimensional inspection cannot be performed.The overall complaint was confirmed as the observed condition of the dlt ts cer hd 12/14 32mm +9 would contribute to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: 1) quantity manufactured: (b)(4).2) date of manufacture: 17/jun/2021.3) any anomalies or deviations identified in dhr: no.4) expiry date: 31/may/2026.5) ifu reference: ms-0902-00-820.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Search Alerts/Recalls
|
|