Catalog Number 386863 |
Device Problem
Retraction Problem (1536)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/15/2024 |
Event Type
malfunction
|
Event Description
|
It was reported that bd us cathena 20gx1.25in straight bc needle retraction failed the following information was provided by the initial reporter: it was reported by customer that we had a 20g iv malfunction earlier.When the nurse went to pull back the safety the needle wouldn¿t retract.It appears to be bent and the patient had to be stuck again because of it.I have attached pictures and saved the angio this time! i have it in my office.Verbatim: we had a 20g iv malfunction earlier.When the nurse went to pull back the safety the needle wouldn¿t retract.It appears to be bent and the patient had to be stuck again because of it.I have attached pictures and saved the angio this time! i have it in my office.
|
|
Manufacturer Narrative
|
H.3.If a device evaluation and/or device history review is completed, a supplemental report will be filed.
|
|
Event Description
|
Material#: 386863 batch#: 3293975 it was reported by customer that we had a 20g iv malfunction earlier.When the nurse went to pull back the safety the needle wouldn¿t retract.It appears to be bent and the patient had to be stuck again because of it.I have attached pictures and saved the angio this time! i have it in my office.Verbatim: we had a 20g iv malfunction earlier.When the nurse went to pull back the safety the needle wouldn¿t retract.It appears to be bent and the patient had to be stuck again because of it.I have attached pictures and saved the angio this time! i have it in my office.
|
|
Manufacturer Narrative
|
Our quality engineer inspected the photos submitted for evaluation.The reported issue of safety activation failure was confirmed upon inspection of the photos.However, bd cannot confirm the cause of the failure to our manufacturing process since no physical sample was returned.We would be very interested in examining product that does not meet your expectations and our quality standards.Examination of the actual product involved may provide clarification as to the cause of the reported failure.A review of our risk management documentation was performed and indicates that the potential risk of the reported event was assessed appropriately.Production records were reviewed, and this batch meets our manufacturing specification requirements.Current controls include a daily functional test and a two-hourly in-process functional test to check and detect safety activation failure.
|
|
Search Alerts/Recalls
|