• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: SYNTHES GMBH SHAFT FOR 90 SCREWDRIVER

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

SYNTHES GMBH SHAFT FOR 90 SCREWDRIVER Back to Search Results
Catalog Number 03.505.003
Device Problem Mechanical Jam (2983)
Patient Problem Insufficient Information (4580)
Event Date 12/20/2023
Event Type  malfunction  
Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H10 additional narrative: h3, h6: a product investigation was conducted.The device associated with this report was returned to depuy synthes for evaluation.Visual analysis of the returned sample found no damage or defect found related to reported issue.Furthermore a foreign unknown substance is found on the fluted tip of inner shaft; root cause of this condition cannot be established with information available.A functional test was unable to be completely performed without turning handle (product code: 03.505.005).However, shaft and handle for 90 screwdriver that were returned in an assembled condition, can be disassembled with no problem or difficulty.Inner shaft component of the shaft can also be assembled and disassembled in a correct matter.A dimensional inspection was unable to be performed due to the condition of the complaint.The overall complaint was unconfirmed as the observed condition of the shaft for 90 screwdriver would not contribute to the complained device issue.There is no indication that a design or manufacturing issue has caused the complaint condition.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.H3, h4, h6: device history record (dhr) review conducted: product code: : 03.505.003; lot number : 8216382; release to warehouse date : 17.Aug.2022; expiration date : na; supplier: (b)(4).Manufacturing site: werk selzach; a manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
 
Event Description
Device report from depuy synthes reports an event in japan as follows: it was reported that during a sagittal split ramus osteotomy (ssro) performed on (b)(6) 2023, the instruments in question were assembled and rotated as a screwdriver, however they did not rotate.Other instruments were assembled as a drill, and they were used as a screwdriver instead of the instruments in question.The surgery was completed successfully within thirty (30) minutes delay.Patient outcome is reported as stable.No further information is available.During manufacturer's investigation of the returned device it was identified that a foreign unknown substance was on the fluted tip of inner shaft.This report is for one (1) shaft for 90° screwdriver.This is report 1 of 1 for complaint (b)(4).
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
SHAFT FOR 90 SCREWDRIVER
Type of Device
SCREWDRIVER
Manufacturer (Section D)
SYNTHES GMBH
eimattstrasse 3
oberdorf 4436
SZ  4436
Manufacturer (Section G)
SYNTHES SELZACH
bohackerweg 5
selzach 2545
SZ   2545
Manufacturer Contact
kate karberg
1302 wrights lane east
west chester, PA 19380
8472871282
MDR Report Key18907477
MDR Text Key337749969
Report Number8030965-2024-03675
Device Sequence Number1
Product Code HXX
UDI-Device Identifier10887587013299
UDI-Public(01)10887587013299
Combination Product (y/n)N
Reporter Country CodeJA
PMA/PMN Number
K082649
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Foreign,Health Professional,Company Representative
Reporter Occupation Physician
Type of Report Initial
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Catalogue Number03.505.003
Device Lot Number8216382
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer03/06/2024
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 03/13/2024
Initial Date FDA Received03/14/2024
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured08/17/2022
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Unknown
Patient Sequence Number1
Treatment
HANDLE FOR 90 SCREWDRIVER; TURNING HANDLE
-
-