MAUDE Adverse Event Report: MEDTRONIC NAVIGATION, INC (LITTLETON) O-ARM 1000 IMAGING SYSTEM 3RD EDITION; IMAGE-INTENSIFIED FLUOROSCOPIC X-RAY SYSTEM, M

Model Number BI70000027230

Device Problem Radiation Output Failure (4027)

Patient Problem No Clinical Signs, Symptoms or Conditions (4582)

Event Date 03/09/2024

Event Type  malfunction  

Manufacturer Narrative

H3) onsite functional and visual examination was performed by a manufacturer representative.The pendant was unable to display kv and ma values.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.

Event Description

Medtronic received information regarding an imaging system.It was reported that the representative was unable to take an z-ray after battery replacement.On the pendant, the kv and ma figures were missing.On the remote desktop, it was found the unit was displaying 'generator overload.'.

Manufacturer Narrative

A medtronic representative went to the site to test the equipment.The atp board was replaced, but the system was still unable to expose x-ray.Unit seems to be normal but engineer unable to verify on 2d and 3d due to hospitals' lack of operating theatre to test.Previously reported codes b01, c02 and d02 are applicable to this analysis.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

Manufacturer Narrative

H3, h6: a medtronic representative made a site visit for servicing.The system was unable to pass small filament auto calibration.The system was unable to fire 3d.The 2d images seemed ok and the 3d images appeared to be grainy.Hardware parts were replaced.The system was unable to run small filament driver auto calibration sequence.Hardware parts were replaced.Previously reported codes b01, c02 and d02 are applicable to this analysis.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

Manufacturer Narrative

Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Medtronic will submit a supplemental report if additional relevant information becomes known.

Event Description

Additional information was received.It was reported that the issue was still ongoing.

• Brand Name: O-ARM 1000 IMAGING SYSTEM 3RD EDITION
• Type of Device: IMAGE-INTENSIFIED FLUOROSCOPIC X-RAY SYSTEM, M
• Manufacturer (Section D): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• Manufacturer (Section G): MEDTRONIC NAVIGATION, INC (LITTLETON); 300 foster st; littleton MA 01460
• Manufacturer Contact: glen belmer ; 7000 central avenue ne rcw215; minneapolis, MN 55432 ; 6122713209
• MDR Report Key: 18914129
• MDR Text Key: 337783365
• Report Number: 3004785967-2024-00173
• Device Sequence Number: 1
• Product Code: OXO
• Combination Product (y/n): N
• Reporter Country Code: SN
• PMA/PMN Number: K173664
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: Foreign,Company Representative
• Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial,Followup,Followup,Followup
• Report Date: 04/04/2024

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Model Number: BI70000027230
• Device Catalogue Number: BI70000027230
• Was Device Available for Evaluation?: No
• Initial Date Manufacturer Received: 03/09/2024
• Initial Date FDA Received: 03/15/2024
• Supplement Dates Manufacturer Received: 03/15/2024; 03/17/2024; 03/17/2024
• Supplement Dates FDA Received: 04/01/2024; 04/04/2024; 04/04/2024
• Was Device Evaluated by Manufacturer?: Yes
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Unknown
• Patient Sequence Number: 1