MEDTRONIC MEXICO S. DE R.L. DE CV ACHIEVE MAPPING CATHETER - 15 MM; CATHETER, ELECTRODE RECORDING, OR PROBE, ELECT
|
Back to Search Results |
|
Model Number 990063-015 |
Device Problems
Mechanical Problem (1384); Material Twisted/Bent (2981)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/07/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
Continuation of d10: product id: afapro28, product type: balloon catheter medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Event Description
|
It was reported that during a cryo ablation procedure, a system notice was received indicating that the system did not recognize the catheter.The balloon catheter was replaced to resolve the issue. it was also reported that the mapping catheter was damaged and the loop was "not true" and unable to hold its shape after exiting the sheath.The mapping catheter was replaced which resolved the issue.The case was completed with cryo. no patient complications have been reported as a result of this event.
|
|
Manufacturer Narrative
|
Product event summary: the 990063-015 mapping catheter with lot 227669016 was returned and analyzed.Visual inspection was performed, and a kink was observed at the tip/loop of the tubing.Additionally, bond damage was observed at the shaft to the tube fitting, and a pinch was observed at the tip/loop of the tubing.Visual inspection of the loop segment area showed the loop was kinked/twisted near the tip, and the loop was pinched near the electrode six.Visual inspection of the pebax segment area showed the pebax tubing at the shaft fitting joint was damaged/kinked.Visual inspection of the electrode(s) showed the electrode(s) were intact with no apparent issues.All electrodes exist on the loop section and no cosmetic issues or anomalies were identified.Visual inspection of shaft segment area showed the shaft was intact with no apparent issues and no kink or any other damage was observed along with the shaft of the mapping catheter.Visual inspection of the introducer showed the introducer was intact with no apparent issues, and no damage or any other issue was observed along with the introducer.Visual inspection of the lemo connector showed the lemo connector was intact with no apparent issues.No damage or any other issue was observed along with the lemo connector.In conclusion, the mapping catheter failed the returned product inspection due to a tip/loop kink, shaft bond damage, and a pinch at the tip/loop of the tubing.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
|
|
Search Alerts/Recalls
|
|
|