BOLTON MEDICAL, INC. RELAY PRO THORACIC STENT-GRAFT SYSTEM; STENT, ENDOVASCULAR GRAFT, AORTIC
|
Back to Search Results |
|
Catalog Number 28-M4-26-195-26U |
Device Problems
Difficult to Advance (2920); Ejection Problem (4009); Difficult or Delayed Separation (4044)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 02/28/2024 |
Event Type
malfunction
|
Event Description
|
"during prep of the device, the wire lumen flushed without difficulty.When flushing the side port to deair and flush the graft some resistance was met but device flushed successfully.Device was advanced in position #1 to the landing zone without problems.In position #2, the inner sheath retracted without difficulty when using the mechanical advantage but when the disengagement button was pressed, additional effort was required to fully deploy the graft.Position #3, again, more effort than typically required was needed to release the proximal clasp.No issues were encountered when reengaging the device tip into the sheath in position #4." patient outcome: "no immediate patient consequences were observed.Completion arteriogram was performed showing good placement of the device with no endoleaks identified.".
|
|
Manufacturer Narrative
|
Bolton medical, inc.(d/b/a terumo aortic), herein known as the "company", is submitting this report pursuant to 21 cfr part 803, has made reasonable efforts to obtain complete information, and has provided as much as is available to the company as of the submission date of this report.This report is based on information obtained by the company, which may not have been able to fully investigate or verify prior to the date the report was required by the regulations.Any required fields that are unpopulated are blank because the information is currently unknown, unavailable, or not applicable.This report does not constitute an admission or a conclusion by anyone that the device caused or contributed to the event described in the report.In particular, this report does not constitute a legal admission by anyone that the product described in this report has any defects or has malfunctioned, as defined from a legal standpoint.These words are included in the report and are fixed items for selection created by the certain regulations, to categorize the type of event solely for the purpose of reporting pursuant to part 803.This statement should be included with any information or report disclosed to the public under the freedom of information act.
|
|
Event Description
|
"during prep of the device, the wire lumen flushed without difficulty.When flushing the side port to deair and flush the graft some resistance was met but device flushed successfully.Device was advanced in position #1 to the landing zone without problems.In position #2, the inner sheath retracted without difficulty when using the mechanical advantage but when the disengagement button was pressed, additional effort was required to fully deploy the graft.Position #3, again, more effort thatn typically required was needed to release the proximal clasp.No issues were encountered when reengaging the device tip into the sheath in position #4." patient outcome: "no immediate patient consequences were observed.Completion arteriogram was performed showing good placement of the device with no endoleaks identified.".
|
|
Manufacturer Narrative
|
Bolton medical, inc.(d/b/a terumo aortic), herein known as the "company", is submitting this report pursuant to 21 cfr part 803, has made reasonable efforts to obtain complete information, and has provided as much as is available to the company as of the submission date of this report.This report is based on information obtained by the company, which may not have been able to fully investigate or verify prior to the date the report was required by the regulations.Any required fields that are unpopulated are blank because the information is currently unknown, unavailable, or not applicable.This report does not constitute an admission or a conclusion by anyone that the device caused or contributed to the event described in the report.In particular, this report does not constitute a legal admission by anyone that the product described in this report has any defects or has malfunctioned, as defined from a legal standpoint.These words are included in the report and are fixed items for selection created by the certain regulations, to categorize the type of event solely for the purpose of reporting pursuant to part 803.This statement should be included with any information or report disclosed to the public under the freedom of information act.
|
|
Search Alerts/Recalls
|
|
|