Catalog Number 110030020 |
Device Problem
Component Misassembled (4004)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 03/15/2024 |
Event Type
malfunction
|
Manufacturer Narrative
|
Product complaint #: (b)(4).B3: date of event is an unknown date.This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Event Description
|
It was reported that device was not assembled when received.
|
|
Event Description
|
Additional information was received: what was the exact allegation against the device? was it worn, cracked, broken into pieces, bent, stripped, cross threaded or any device interaction? the device should come with screw inserted into proximal body to which this had not happened and it was not inserted into proximal body and it therefore at risk of falling out of packaging and potential cross tread and calibration issues if this has not been checked in assembly process.No surgical delay.Was there any adverse consequences that affected the patient because of the reported event? no, need to be aware that this could be a problem with batch and risks that needs to be accessed as this might cause a problems in theatre.
|
|
Manufacturer Narrative
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes joint reconstruction, or its employees that the report constitutes an admission that the product, depuy synthes joint reconstruction, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
Manufacturer Narrative
|
Product complaint (b)(4).Investigation summary on opening the sterile packaging the employee found the implant in two parts instead of one.The product was not fully assembled and this is a problem as the screw could fallout on opening and be contaminated and the implant would not be usable.This is a greater problem if there is only one as we mostly only have one in a loan kit and in a hospital.The product was not returned to depuy synthes, however photos were provided for review.See attachment (b)(4).Implant no fully assembled in packaging.The photo investigation revealed that the glbl unite ant body 142 sz 10 was observed disassembled because the screw is separated, whereas, according to specifications, the screw should be assembled with the body of the implant.As the device was not returned, an as-received condition could not be assessed, and a dimensional inspection and document/specification review were not completed.The overall complaint was confirmed as the observed condition of the glbl unite ant body 142 sz 10 would contribute to the complained device issue.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot a nr ((b)(4).) has been initiated to address the current complaint issue.
|
|
Search Alerts/Recalls
|
|