|
Catalog Number PRO7000DE |
Device Problem
Overheating of Device (1437)
|
Patient Problem
Burn(s) (1757)
|
Event Date 04/01/2024 |
Event Type
Injury
|
Manufacturer Narrative
|
The reported device is being returned to conmed for evaluation.A supplemental and final report will be filed following the completion of the device evaluation and complaint investigation.We will continue to monitor for trends through the complaint system to assure patient safety.H3 other text: device not yet received.
|
|
Event Description
|
The sales representative reported on behalf of the customer, that the pro7000de, hall oralmax elite high speed drill was being used on approximately (b)(6) 2024 date when it was reported ¿the brand-new handpieces were overheating.Dr.Calls me and is saying it is happening again and burnt a patient's lip.Unknown which one or if both burned the patient.¿ further assessment was attempted, and a good faith effort was completed with no additional information found.There was no report of medical intervention, or extended hospitalization to the patient or user.This report is being raised on the reported injury due to an unknown degree of burn.
|
|
Manufacturer Narrative
|
The device was not overdue for preventative maintenance.No fault was found with the device.The device was tested and met all specifications.The manufacturing documents from the device history record have been reviewed with special attention to the manufacturing and inspection of the product.The product released for distribution was found to have met all specifications prior to shipment.The service history was reviewed and no relationship to this complaint was found.A two-year review of complaint history revealed there has been a total of (b)(4) complaints, regarding 4 devices, for this device family and failure mode.During this same time frame (b)(4) devices have been manufactured and shipped worldwide.Should all the complaint devices have been found confirmed for this reported failure, the rate of failure would be (b)(4).Per the instructions for use, the user is advised to continually check handpiece for overheating.If overheating is sensed, immediately discontinue use and return equipment for service.Overheating of the blade or bur may cause damage to the blade or bur and may cause burns or thermal necrosis.Bur guards should always be checked before use.To reduce the risk of injury, prior to surgery, spin the bur guard on a bur.If the bur guard spins freely, the bearing is still good.Otherwise, the bur guard must be sent for repair immediately.Do not use.Overheating can occur if bur guard bearings are worn or not kept clean.We will continue to monitor for trends through the complaint system to assure patient safety.
|
|
Event Description
|
Update: further assessment information found that the patient was diagnosed with a second degree burn and it was treated with bacitracin.The current status of the patient was reported as "well healed.".The sales representative reported on behalf of the customer, that the pro7000de, hall oralmax elite high speed drill was being used on approximately(b)(6) 2024 date when it was reported ¿the brand-new handpieces were overheating.Dr.Calls me and is saying it is happening again and burnt a patient's lip.Unknown which one or if both burned the patient.¿.Further assessment was attempted, and a good faith effort was completed with no additional information found.There was no report of medical intervention, or extended hospitalization to the patient or user.This report is being raised on the reported injury due to an unknown degree of burn.
|
|
Search Alerts/Recalls
|
|
|