|
Model Number M00565110 |
Device Problem
Activation, Positioning or Separation Problem (2906)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 06/25/2014 |
Event Type
malfunction
|
Event Description
|
Note: this report pertains to one of two devices used during the same procedure.Refer to manufacturer report # 3005099803-2014-02872 and manufacturer report # 3005099803-2014-02909 for the associated device information.It was reported to boston scientific corporation that two wallflex enteral colonic stents were used in the colon during a stent colonoscopy procedure performed on (b)(6) 2014.According to the complainant, the stents were being used to treat a stricture due to colon cancer and the patient anatomy was tortuous.During the procedure, the physician attempted to deploy a 22x60 wallflex colonic stent (the subject of mfr report# 3005099803-2014-02909) but the stent could not be fully released.The physician reconstrained the stent and attempted to deploy the stent a second time but could not be fully released.The catheter kinked and broke.The stent was reported to have been removed from the patient fully constrained on the delivery system.The physician inserted a 22x90 wallflex colonic stent (the subject of mfr report# 3005099803-2014-02872) and attempted to deploy the stent but the catheter kinked and the stent could not be fully released.The stent was removed from the patient and the procedure was completed with a 22 x 120 wallflex colonic stent.There were no patient complications reported as a result of this event.The patient's condition at the conclusion of the procedure was reported to be stable.Note: this event has been deemed reportable based on the investigation result that the stent was received partially deployed.
|
|
Manufacturer Narrative
|
Patient's exact age is unknown; however it was reported that the patient was over the age of 18.Investigation result of stent partially deployed.Visual examination of the returned device noted that the stent was received partially deployed by 15mm.During device analysis, the investigator was unable to deploy the stent of the device.The dark blue outer sheath was severely accordioned at numerous positions along its length and had detached from the distal handle.The stainless steel handle was also kinked.The shaft was dissected at the proximal end of the clear outer sheath.It was still not possible to advance or retract the inner catheter.The stent and inner catheter were withdrawn from the outer sheath.No issues were noted with the profile of the deployed stent.The inner catheter was kinked.The outer sheath was dissected longitudinally and it was noted that some of the polytetrafluoroethylene (ptfe) coating had partially peeled away from the inside of the outer sheath.No other issues were noted with the device.Given the event description and condition of the returned device, there isn't enough information to determine a probable root cause.A review of the device history record (dhr) confirmed that the device met all material, assembly, and product specifications at the time of release to distribution. a labeling review was performed and, from the information available, this device was used per the directions for use (dfu) / product label.
|
|
Search Alerts/Recalls
|
|
|