• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: NUVASIVE, INC. X-CORE VERTEBRAL BODY REPLACEMENT DEVICE; SPINAL VERTEBRAL BODY REPLACEMENT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

NUVASIVE, INC. X-CORE VERTEBRAL BODY REPLACEMENT DEVICE; SPINAL VERTEBRAL BODY REPLACEMENT Back to Search Results
Model Number 7220079
Device Problems Collapse (1099); Mechanical Problem (1384); Detachment of Device or Device Component (2907)
Patient Problems Failure of Implant (1924); Pain (1994)
Event Date 12/16/2014
Event Type  malfunction  
Event Description
Vertebral body replacement device was placed following a corpectomy of the l3 and l4 levels that was performed on (b)(6) 2014.In (b)(6) 2014 patient felt pain after sustaining a fall.During follow up visit, it was noted from radiographs that the end-cap had disassociated itself along with height reduction.Revision surgery was performed on (b)(6) 2015.
 
Manufacturer Narrative
(b)(4).The radiographs were received and the event was confirmed.The vertebral body replacement device had partially collapsed.Visual inspection of the explant noted marks consistent with set screw tightening; one end-cap screw was also damaged and the other had loosened which led to the end-cap separating from the implant core.Root cause of the event has not been established at this time.Review of the device history records notes no material non-conformances of manufacturing errors that may have caused or contributed to this mode of failure.Review of labeling notes: internal fixation appliances are load-sharing devices that hold bony structures in alignment until healing occurs.If healing is delayed, or does not occur, the implant may eventually loosen, bend or break.Loads on the device produced by load bearing and by the patient's activity level will dictate the longevity of the implant.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
X-CORE VERTEBRAL BODY REPLACEMENT DEVICE
Type of Device
SPINAL VERTEBRAL BODY REPLACEMENT
Manufacturer (Section D)
NUVASIVE, INC.
7475 lusk blvd
san diego CA 92121
Manufacturer Contact
deborah silva
7475 lusk blvd
san diego, CA 92121
8589091830
MDR Report Key4438224
MDR Text Key19767964
Report Number2031966-2014-00092
Device Sequence Number1
Product Code MQP
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
K090176
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type Health Professional,User Facility,Company Representative
Reporter Occupation Physician
Type of Report Initial
Report Date 01/14/2015
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model Number7220079
Device Lot NumberDR3541
Was Device Available for Evaluation? Yes
Date Returned to Manufacturer01/09/2015
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 12/16/2014
Initial Date FDA Received01/14/2015
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured08/01/2012
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age63 YR
-
-