Model Number H749RB4350060 |
Device Problem
Hole In Material (1293)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(4).
|
|
Event Description
|
It was reported that a balloon pinhole occurred.A 06/3.50 flextome⠃cutting balloon⠃catheter was selected to treat the target lesion.During procedure, it was noted that the balloon could not be inflated well because the pressure was leaking due to a hole.The procedure was completed with another of the same device.No patient complications were reported and the patient's status was stable.
|
|
Manufacturer Narrative
|
Device evaluated by mfr: the device was returned for evaluation.A visual examination identified that the balloon was not folded which indicates that the balloon was subjected to positive pressure.Blood was identified within the balloon and inflation lumen which is evidence of a device leak.The returned device was attached to an inflation unit and positive pressure was applied in an attempt to inflate the balloon.The balloon could not be inflated due to the solidified blood present within the balloon and inflation lumen.After the device was soaked, it was attached to an inflation device, subjected to positive pressure and liquid was observed to be leaking from a balloon pinhole at 1 mm distal from the distal end of the proximal markerband.A visual and microscopic examination observed no damage to the tip or blades.All blades were present and fully bonded to the balloon surface.No other issues were identified during product analysis.The manufacturing batch record review confirmed that the device met all material, assembly and performance specifications.The most probable root cause is operational context as device performance was limited due to anatomical procedural factors.(b)(4).
|
|
Event Description
|
It was reported that a balloon pinhole occurred.A 06/3.50 flextome cutting balloon catheter was selected to treat the target lesion.During procedure, it was noted that the balloon could not be inflated well because the pressure was leaking due to a hole.The procedure was completed with another of the same device.No patient complications were reported and the patient's status was stable.
|
|
Search Alerts/Recalls
|