• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: BIOMET MICROFIXATION ELEVATOR #301

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

BIOMET MICROFIXATION ELEVATOR #301 Back to Search Results
Model Number N/A
Device Problems Bent (1059); Fracture (1260)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Type  malfunction  
Manufacturer Narrative
Without a product return, no product evaluation is able to be conducted.The lot number is unknown; therefore the device history records are unable to be reviewed.Current information is insufficient to permit a valid conclusion about the cause of this event.If additional information is obtained that adds value to the relevant content of this report and/or a conclusion can be drawn, a follow-up report will be sent.
 
Event Description
The facility reported four (4) 301 elevators broke at the tip during four different procedures.The dates and specific case details were unable to be provided, however it was confirmed that all parts of the instruments were retrieved and no adverse events were reported.
 
Manufacturer Narrative
The device evaluation is anticipated, a follow up report will be sent upon completion of the product evaluation.Report one of four for the same complaint; see also 0001032347-2016-00053-1, 00125, 00126 and 00127.
 
Manufacturer Narrative
All parts reported for this event were returned and evaluated for the complaint that the tips have broken.Based on the product evaluation, the complaint for this part and lot was unconfirmed with a bent tip instead of a broken tip.Based on the product evaluation, the most-likely underlying cause of the bent tip was determined to be the excessive force experienced during use outside of the intended use.There are no indications of manufacturing defects.This is report 1 of 4 for the same event.Reports 2, 3, and 4 are reported on mfr #0001032347-2016-00125-1, 0001032347-2016-00126-1, and 0001032347-2016-00127-1.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
ELEVATOR #301
Type of Device
ELEVATOR
Manufacturer (Section D)
BIOMET MICROFIXATION
1520 tradeport drive
jacksonville FL 32218
Manufacturer (Section G)
BIOMET MICROFIXATION
1520 tradeport drive
jacksonville FL 32218
Manufacturer Contact
michelle cole
1520 tradeport drive
jacksonville, FL 32218
9047414400
MDR Report Key5419872
MDR Text Key37792428
Report Number0001032347-2016-00053
Device Sequence Number1
Product Code EMJ
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
PEXEMPT
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type health professional
Reporter Occupation Other Health Care Professional
Type of Report Initial,Followup,Followup
Report Date 01/12/2016
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Model NumberN/A
Device Catalogue Number09-0257
Device Lot Number061608F08
Other Device ID NumberN/A
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer02/10/2016
Is the Reporter a Health Professional? Yes
Initial Date Manufacturer Received 01/12/2016
Initial Date FDA Received02/09/2016
Supplement Dates Manufacturer ReceivedNot provided
Not provided
Supplement Dates FDA Received03/09/2016
04/29/2016
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured06/18/2008
Is the Device Single Use? No
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Unknown
Removal/Correction NumberN/A
Patient Sequence Number1
-
-