Catalog Number 03.501.080 |
Device Problems
Sticking (1597); Device Operates Differently Than Expected (2913)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 05/26/2016 |
Event Type
malfunction
|
Manufacturer Narrative
|
(b)(6).Device is an instrument and is not implanted/explanted.Lot number provided (873513) was not able to be verified in the system.Without a lot number the device history records review could not be completed.The device was received, the investigation could not be completed, and no conclusion could be drawn, as product is entering the complaint system.Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Event Description
|
It was reported the trigger for the application instrument for sternal zipfix would not release; the trigger seemed to be sticking.During the patient's initial surgery on (b)(6) 2016, the tensioner would not tighten zip fix ties as desired.When checked after surgery, the tensioner trigger was sticking.There was no surgical delay or patient harm.The procedure was successfully completed.This is report 1 of 1 for (b)(4).
|
|
Manufacturer Narrative
|
No service history review can be performed as part number 03.501.080 with lot number(s) 8733513 is a lot/batch controlled item.The manufacture date of this item is january 10, 2014.The source of the manufacture date is the release to warehouse date.The service history review is unconfirmed.Manufacturing location: (b)(4).Manufacturing date: january 06, 2014.No non-conformance reports were generated during production.Review of the device history record(s) showed that there were no issues during the manufacture of the product that would contribute to this complaint condition.A service and repair evaluation was completed: the customer reported the trigger would not release.The repair technician reported lube/oil/clean as the reason for repair.The cause of the issue is unknown.No parts were replaced.The item was repaired per the inspection sheet, passed synthes final inspection and will be returned to the customer upon completion of the service and repair process.The evaluation was confirmed.(b)(4).Device was used for treatment, not diagnosis.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
|
|
Search Alerts/Recalls
|