MAUDE Adverse Event Report: SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD A7 ANESTHESIA SYSTEM

Model Number A& ANESTHESIA SYSTEM

Device Problems Air Leak (1008); Device Dislodged or Dislocated (2923)

Patient Problem No Consequences Or Impact To Patient (2199)

Event Type  malfunction  

Manufacturer Narrative

The customer was contacted for additional information and no new information was provided.Due to the lack of available information no further evaluation can be performed.Device not available for evaluation.

Event Description

The customer reported that during patient use the paw gauge from the a7 anesthesia delivery system become partially dislodged and generated a leak.The gauge was sitting in the right place but not fully inserted.The gauge was then pushed back into its housing and the device continued to operate normally.No adverse event was reported.The event was reported during the follow up of a patient event reported under mdr 2221819-2017-00001.

Manufacturer Narrative

(b)(4).Device not available for evaluation.

Event Description

The customer reported that during patient use the paw gauge from the a7 anesthesia delivery system become partially dislodged and generated a leak.The gauge was sitting in the right place but not fully inserted.The gauge was then pushed back into its housing and the device continued to operate normally.No adverse event was reported.The event was reported during the follow up of a patient event reported under mdr 2221819-2017-00003.

Manufacturer Narrative

On april 25, 2017, mindray field service representative visited the medical center again, and investigated the point of use of the specific a7 anesthesia machine as well as its surrounding area.During the on-site investigation, the biomed tech said there has been one staff cleaning all the rooms and devices, prior to the original report (the event was reported under mdr# 3007222337-2017-00003) and no one was aware that the paw gauge could be removed.(note: this paw gauge is not designed to be routinely removed.It is a redundant design as a backup pressure monitoring device in case the primary pressure sensor, which displays the pressure on a7's led screen, fails).If the surface of the a7 breathing system is cleaned and disinfected without due care, it is possible that the paw gauge is dislodged under excessive external force.During the onsite visit, mindray field service representative also found there have been many cables and tubing draped around the breathing system.These cables and tubes are connected to devices and patient on the surgical bed during the operation.Particularly, the tube of etco2 sample is connected to patient during the operation.If this tubing is wound around the paw gauge, and someone inadvertently pulled this tubing, the gauge could become dislodged.We are able to duplicate this in simulation tests.After this event, the medical center has streamlined responsibilities and the anesthesia tech is the only one that "turns over" the anesthesia system between cases.In addition, the anesthesia tech now checks that the paw gauge is fully inserted into the breathing system as part of his normal turn over process of the machine between cases.To date, this issue (paw gauge leaking or getting dislodged) has not reoccurred, according to the medical center.We also analyzed the gauge pointer issue reported in the complaint documented on mdr# 3007222337-2017-00003 and found the pointer was off from the dial plate.The separation force of the pointer was measured and no discrepancy was detected.The detached indicator pointer issue is irrelevant to the leak problem, and the separation is very likely caused by excessive external force.It should be noted the paw gauge is a backup of the electronic pressure sensor, and by design, the user monitors the parameter on the led screen of the a7 anesthesia system.The event documented on mdr# 3007222337-2017-00003 is the first complaint about gauge pointer separation since the launch of a7 anesthesia system in us and out of us market.(b)(4).

• Brand Name: A7 ANESTHESIA SYSTEM
• Type of Device: ANESTHESIA SYSTEM
• Manufacturer (Section D): SHENZHEN MINDRAY BIO-MEDICAL ELECTRONICS CO., LTD; buildings 9-13, baiwangxin; high-tech industrial park; baimang, xili town, nanshan, shenzhen, 51810 8; CH 518108
• Manufacturer Contact: serena chen ; keji 12th road south; nanshan,; shenzhen, 51805-7 ; CH 518057
• MDR Report Key: 6277943
• MDR Text Key: 65770242
• Report Number: 3007222337-2017-00002
• Device Sequence Number: 1
• Product Code: BSZ
• Combination Product (y/n): N
• Reporter Country Code: US
• PMA/PMN Number: K151954
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,distri
• Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date: 01/03/2017

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: No Information
• Device Model Number: A& ANESTHESIA SYSTEM
• Device Catalogue Number: 0632F-PA00003
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Event Location: Hospital
• Date Report to Manufacturer: 01/03/2017
• Initial Date Manufacturer Received: Not provided
• Initial Date FDA Received: 01/25/2017
• Supplement Dates Manufacturer Received: Not provided; Not provided
• Supplement Dates FDA Received: 02/14/2017; 04/28/2017
• Was Device Evaluated by Manufacturer?: Device Not Returned to Manufacturer
• Is the Device Single Use?: No
• Is This a Reprocessed and Reused Single-Use Device?: No
• Type of Device Usage: Reuse
• Patient Sequence Number: 1