• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: NUMED, INC. COVERED CP STENT; AORTIC STENT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

NUMED, INC. COVERED CP STENT; AORTIC STENT Back to Search Results
Model Number 427
Device Problem Torn Material (3024)
Patient Problem No Known Impact Or Consequence To Patient (2692)
Event Date 08/15/2017
Event Type  malfunction  
Manufacturer Narrative
The stent was returned and evaluated.The stent had been crimped down so small that the zigs at the end of the stent are overlapped (see picture attachments).One glue spot was detached.There are weak spots in the covering that appear to have been caused when the covering was pinched between the struts during crimping.This stent is only approved to be used on 12mm - 24mm balloons.Anything smaller than that can damage the stent.It is likely that the crimping of the stent down on such a small balloon led to the weak spots in the covering.A warning in the instructions for use states :"crimping the stent on a balloon catheter smaller than 12mm may cause damage to the stent.".
 
Event Description
As per the report from bis - "physician was crimping the stent on the balloon.After crimping, physician noticed what appeared to be some tears in the material that were not believed to be caused by the physician.The stent was removed and another stent placed.The stent was being mounted on a 10x3.5 bib.There was no difficulty mounting the stent.Crimping was done by hand.The ring mandril was not used during crimping.The stent did not slip.The slight tears in the covering of the stent were not believed to be caused by the crimping process.Contrast was being used during prep.Physician was using the product for severe coarctation of aorta.".
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
COVERED CP STENT
Type of Device
AORTIC STENT
Manufacturer (Section D)
NUMED, INC.
2880 main street
hopkinton NY 12965
Manufacturer (Section G)
NUMED, INC.
2880 main street
hopkinton NY 12965
Manufacturer Contact
nichelle laflesh
2880 main street
hopkinton, NY 12965
3153284491
MDR Report Key6826600
MDR Text Key85283034
Report Number1318694-2017-00025
Device Sequence Number1
Product Code PNF
UDI-Device Identifier04046964898907
UDI-Public04046964898907
Combination Product (y/n)N
Reporter Country CodeUS
PMA/PMN Number
P150028
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type distributor,health profession
Reporter Occupation Other
Type of Report Initial
Report Date 08/29/2017
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Physician
Device Expiration Date03/31/2021
Device Model Number427
Device Catalogue NumberCVRDCP8Z34
Device Lot NumberCCP-0660
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer08/21/2017
Is the Reporter a Health Professional? No
Was the Report Sent to FDA? No
Initial Date Manufacturer Received 08/18/2017
Initial Date FDA Received08/29/2017
Was Device Evaluated by Manufacturer? Yes
Date Device Manufactured02/24/2016
Is the Device Single Use? Yes
Is This a Reprocessed and Reused Single-Use Device? No
Type of Device Usage Initial
Patient Sequence Number1
Patient Age7 YR
Patient Weight20
-
-