COOK ENDOSCOPY ACROBAT® 2 CALIBRATED TIP WIRE GUIDE; OCY, ENDOSCOPIC GUIDEWIRE, GASTROENTEROLOGY-UROLOGY
|
Back to Search Results |
|
Model Number G47616 |
Device Problem
Peeled/Delaminated (1454)
|
Patient Problem
No Consequences Or Impact To Patient (2199)
|
Event Date 12/07/2017 |
Event Type
malfunction
|
Manufacturer Narrative
|
Concomitant medical devices: boston scientific sphincterotome, unknown model, boston scientific extraction balloon, unknown model, boston scientific plastic stent, unknown model.Investigation evaluation: a product evaluation was not performed in response to this report because the product said to be involved was not provided to cook for evaluation.The report could not be confirmed.The device history record for the lot number said to be involved was reviewed.A discrepancy or anomaly was not observed with the product that was released for distribution.Investigation conclusion: we could not conduct a complete investigation because the product said to be involved was not returned for evaluation.A definitive cause for the reported observation could not be determined.If additional pressure is applied to the wire guide and/or accessory device(s) while moving the wire guide inside the accessory device(s), this could contribute to wire guide coating damage.The instructions for use instruct the user to do the following: "prior to removing wire guide from holder, flush with 30 cc of sterile water." failure to flush the wire guide can result in damage to the wire guide."flush endoscope accessory channel and/or lumen of device with sterile water, then insert wire guide floppy end first.Note: for best results, wire guide should be kept wet, if applicable." failure to flush the endoscope channel can result in damage to the wire guide.Prior to distribution, all acrobat 2 calibrated tip wire guides are subjected to a visual inspection and functional testing to ensure device integrity.A review of the device history record confirmed that the lot said to be involved met all manufacturing requirements prior to shipment.Corrective action: corrective action is not warranted at this time based on the quality engineering risk assessment.Quality assurance will continue to monitor for complaint trends and reassess the risk assessment results as post market feedback continues to become available.
|
|
Event Description
|
During an endoscopic retrograde cholangiopancreatography (ercp), the physician used a cook acrobat 2 calibrated tip wire guide.Under normal usage during the ercp, which was a little difficult, the customer noticed that the wire guide sheath tore at the distal end, revealing the wire underneath [wire guide coating damage].The consequence was that it was impossible to continue the normal procedure and a change of the wire guide to another manufacturer's wire guide was required.Per the customer, other consequences were "important radiological exposure 1699 cgy [centigray, absorbed radiation dose] cm 2, lengthening of procedure under ag, and infectious risk." the customer stated this event was a "serious dysfunction." the following additional information was received on the customer complaint form on 12/15/2017: "after use of an extraction balloon, the operator decided to place a plastic stent.The sheath of the wire guide peeled at the distal end.It was impossible to implant the plastic stent, so they used another wire guide to finish the procedure.".
|
|
Manufacturer Narrative
|
Initially, the following information was reported to cook: "during an endoscopic retrograde cholangiopancreatography (ercp), the physician used a cook acrobat 2 calibrated tip wire guide.Under normal usage during the ercp, which was a little difficult, the customer noticed that the wire guide sheath tore at the distal end, revealing the wire underneath [wire guide coating damage].The consequence was that it was impossible to continue the normal procedure and a change of the wire guide to another manufacturer's wire guide was required.Per the customer, other consequences were "important radiological exposure 1699 cgy [centigray, absorbed radiation dose] cm 2, lengthening of procedure under ag, and infectious risk." the customer stated this event was a "serious dysfunction." the following additional information was received on the customer complaint form on 12/15/17: "after use of an extraction balloon, the operator decided to place a plastic stent.The sheath of the wire guide peeled at the distal end.It was impossible to implant the plastic stent, so they used another wire guide to finish the procedure." an initial mdr was sent on 12/29/2017 based on this information.The device said to be involved was evaluated.The initial information indicated that the wire guide coating tore at the distal end.When evaluated at cook, it was determined that the coating damage did not expose the core wire.Therefore, this event no longer meets the reporting criteria of an fda mdr report.
|
|
Event Description
|
This follow up report is being sent to cancel the initial report submitted related to this event.
|
|
Search Alerts/Recalls
|
|
|