Model Number RT319 |
Device Problem
Obstruction of Flow (2423)
|
Patient Problem
Respiratory Distress (2045)
|
Event Type
Injury
|
Manufacturer Narrative
|
(b)(4).The rt319 adult bi-level cpap breathing circuit is not sold in the usa but it is similar to a product which is sold in the usa.The 510(k) for that product is k983112.The complaint rt319 adult bi-level cpap circuit is not expected to be returned to fisher & paykel healthcare for investigation; however, we have sent further questions to the hospital to obtain further information with regards to the reported event.We will provide a follow up report upon completion of our investigation.
|
|
Event Description
|
A hospital in (b)(6) reported via a fisher & paykel healthcare (f&p) representative that the rt319 adult bi-level cpap breathing circuit caused raised co2 and patient distress on a tracheostomy patient due to secretions blocking the rt017 exhalation port.It was later confirmed that the incident occurred three times on the same patient.F&p is seeking further information on the additional incidents that were reported by the hospital to try to clarify the details of the reported events and if any patient harm was experienced.The patient was reported to be in a stable condition.
|
|
Manufacturer Narrative
|
(b)(4).The rt319 adult b-ilevel cpap breathing circuit is not sold in the usa but it is similar to a product which is sold in the usa.The 510(k) for that product is k983112.The three complaint rt017 exhalation ports and associated rt319 adult bi-level/cpap inspiratory-heated breathing circuits were not available to be returned to fisher & paykel healthcare for evaluation.Our investigation is thus based on the information provided by the hospital and our knowledge of the product.Without the return of the complaint devices, we are unable to determine if the devices had a malfunction which may have caused or contributed to the reported events.A recurring pin gauge test and visual inspection is conducted on the rt017 exhalation port to ensure there are no occlusions in the exhalation holes prior to release for distribution.Any exhalation ports that fail this inspection are discarded.The user instructions that accompany the rt319 adult bi-level/cpap inspiratory-heated breathing circuit include the following warnings: check for occlusions in both inspiratory and pressure line before connecting to patient.Do not block or seal the vent holes on the exhalation port.Appropriate patient monitoring (e.G.Oxygen saturation) must be used at all times.Failure to monitor the patient (e.G.In the event of an interruption to gas flow) may result in serious harm or death.
|
|
Event Description
|
A hospital in (b)(6) reported via a fisher & paykel healthcare (f&p) representative that the rt319 adult bi-level cpap breathing circuit caused raised co2 and patient distress on a tracheostomy patient due to secretions blocking the rt017 exhalation port.It was later confirmed that the incident occurred three times on the same patient.The patient was reported to be in a stable condition.
|
|
Search Alerts/Recalls
|