• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: MEDTRONIC IRELAND VENA SEAL CLOSURE SYSTEM; AGENT, OCCLUDING, VASCULAR, PERMANENT

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

MEDTRONIC IRELAND VENA SEAL CLOSURE SYSTEM; AGENT, OCCLUDING, VASCULAR, PERMANENT Back to Search Results
Catalog Number VS-402
Device Problem Use of Device Problem (1670)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 02/06/2019
Event Type  malfunction  
Manufacturer Narrative
If information is provided in the future, a supplemental report will be issued.
 
Event Description
Physician was using a venaseal to treat the great saphenous vein (gsv).Guidewire was used for insertion of the catheter.Ifu was followed during preparation, and procedure.It was reported that dispensing catheter was loaded with glue with some difficulty experienced.It was not realised at this stage that there was an issue with the gun and the case was continued.It was found that the trigger was not functioning.The trigger on the gun would not properly move the glue forward and would not deliver the glue.Another venaseal kit was opened and used to complete the case, the dispensing gun was removed.The vein closed and 63cm was treated.No patient injury associated with this event.
 
Manufacturer Narrative
Additional information received: the catheter was advanced 5cm caudal to the sfj.There was no issue locating the catheter tip prior to the initial delivery of adhesive however, after compressing for three minutes and then locating the catheter tip is when it was discovered the glue gun was not dispensing.If information is provided in the future, a supplemental report will be issued.
 
Manufacturer Narrative
Correction: this event was filed as ¿reportable malfunction¿ for gun failing to advance following the start of adhesive delivery.On review, it was deemed that the issue of the gun failing to advance following the start of adhesive delivery has never caused or contributed or is likely to cause or contribute to a death or serious injury and therefore do not meet the criteria for a reportable malfunction.This event reported via mdr were due to caution, and thus conservatively reported.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
VENA SEAL CLOSURE SYSTEM
Type of Device
AGENT, OCCLUDING, VASCULAR, PERMANENT
Manufacturer (Section D)
MEDTRONIC IRELAND
parkmore business park west
galway
MDR Report Key8347014
MDR Text Key136616847
Report Number9612164-2019-00532
Device Sequence Number1
Product Code PJQ
Combination Product (y/n)N
PMA/PMN Number
P140018
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Remedial Action Notification
Type of Report Initial,Followup,Followup
Report Date 04/23/2021
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date09/30/2020
Device Catalogue NumberVS-402
Device Lot Number52817
Was Device Available for Evaluation? No
Initial Date Manufacturer Received 02/06/2019
Initial Date FDA Received02/18/2019
Supplement Dates Manufacturer Received02/18/2019
03/25/2021
Supplement Dates FDA Received03/11/2019
04/23/2021
Is This a Reprocessed and Reused Single-Use Device? No
Removal/Correction Number87619
Patient Sequence Number1
Patient Age78 YR
Patient Weight130
-
-