MAUDE Adverse Event Report: EDWARDS LIFESCIENCES, PR FOGARTY ARTERIAL EMBOLECTOMY CATHETER; CATHETER, EMBOLECTOMY

Model Number 120804F

Device Problems Break (1069); Device Damaged by Another Device (2915)

Patient Problems No Consequences Or Impact To Patient (2199); No Known Impact Or Consequence To Patient (2692)

Event Date 03/28/2019

Event Type  malfunction  

Manufacturer Narrative

The product is expected to be returned for analysis; however, it has not yet been received.Upon the return of the product, a supplemental report will be sent with the investigation results.A device history record review was completed and documented that the device met all specifications upon distribution.

Event Description

It was reported that during use in surgery, the balloon on a fogarty catheter was punctured by the broken catheter tip.The issue was noted when the catheter was pulled out of the vessel when retrieving a clot.There were no complications and no additional interventions were needed.There was no allegation of patient injury.Patient demographics were requested but are not available.

Manufacturer Narrative

Our product evaluation laboratory received one model 120804f catheter.As received, a piece of the catheter body measuring approximately 5mm, was broken approximately 7mm from the catheter tip.The catheter body edges at the damaged site appeared to match up.The latex balloon was pierced by the broken catheter body part.The latex edges at the puncture site appeared to match up.Both windings were intact.The lab findings appeared consistent with the customer photo.No other visible damage was observed from the catheter.The customer report of "the balloon was punctured with the broken catheter tip" was confirmed on evaluation.An engineering evaluation has been initiated to assess for any manufacturing-related processes which could be correlated to the complaint.Balloon rupture and catheter separation, as a result of excessive pull force applied to remove adherent material, are the most frequent causes of reported failures.To minimize the risk of vessel damage, balloon rupture, or tip detachment, the maximum recommended inflation volume and pull force for the catheter should not be exceeded.The arterial embolectomy catheter is not recommended for the removal of fibrous, adherent, or calcified material (e.G.Chronic clot, atherosclerotic plaque).This catheter is not designed to withstand the additional pull force needed to remove these materials.The instructions for use of the product contains the following statement: ¿as with all catheterization procedures, complications may occur.These may include local or systemic infection, local hematomas, intimal disruption, arterial dissection, perforation and vessel rupture, hemorrhage, arterial thrombosis, distal embolization of blood clots and atherosclerotic plaque, air embolus, aneurysm, arterial spasm, arteriovenous fistula formation, and balloon rupture with fragmentation, tip separation and distal embolization.¿ complaint histories for all reported events are reviewed against trending control limits on a monthly basis, and any excursions above the control limits are assessed and documented as part of this monthly review.

Manufacturer Narrative

Reference capa-20-00141.

• Brand Name: FOGARTY ARTERIAL EMBOLECTOMY CATHETER
• Type of Device: CATHETER, EMBOLECTOMY
• Manufacturer (Section D): EDWARDS LIFESCIENCES, PR; state rd indus pk 402 km 1.4; anasco PR 00610
• MDR Report Key: 8570729
• MDR Text Key: 143975423
• Report Number: 2015691-2019-01555
• Device Sequence Number: 1
• Product Code: DXE
• Combination Product (y/n): N
• PMA/PMN Number: PREAMENDMENT
• Number of Events Reported: 1
• Summary Report (Y/N): N
• Report Source: Manufacturer
• Source Type: company representative,foreig
• Type of Report: Initial,Followup,Followup
• Report Date: 04/11/2019

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Operator: Health Professional
• Device Expiration Date: 12/18/2020
• Device Model Number: 120804F
• Device Catalogue Number: 120804F
• Device Lot Number: 61516409
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 05/02/2019
• Initial Date Manufacturer Received: 04/11/2019
• Initial Date FDA Received: 05/01/2019
• Supplement Dates Manufacturer Received: 05/17/2019; 07/23/2020
• Supplement Dates FDA Received: 05/30/2019; 01/09/2021
• Is This a Reprocessed and Reused Single-Use Device?: No
• Patient Sequence Number: 1