STRYKER ORTHOPAEDICS-MAHWAH C-TAPER COCR LFIT HEAD 28MM/+5; PROSTHESIS, HIP, SEMI-CONSTRAINED, METAL/POLYMER, UNCEMENTED
|
Back to Search Results |
|
Catalog Number 06-2805 |
Device Problems
Component Incompatible (1108); Device Dislodged or Dislocated (2923)
|
Patient Problem
Injury (2348)
|
Event Date 08/30/2019 |
Event Type
Injury
|
Manufacturer Narrative
|
Review of the device history records indicate devices were manufactured and accepted into final stock with no relevant reported discrepancies.There have been no other similar events for the lot referenced.It was noted that the device is not available for evaluation.Should additional information become available, it will be provided in a supplemental report upon completion of the investigation.
|
|
Event Description
|
On (b)(6) 2019 revision surgery was performed due to bha migration.Bha was revised to tha.Intraoperatively, a c-taper head was used with a morse-taper stem by mistake without being noticed by anyone.2 days after the revision surgery, the head disassociation was found.The second revision was performed in the same day, the c-taper head was revised to a morse-taper head.
|
|
Event Description
|
On (b)(6) 2019 revision surgery was performed due to bha migration.Bha was revised to tha.Intraoperatively, a c-taper head was used with a morse-taper stem by mistake without being noticed by anyone.2 days after the revision surgery, the head disassociation was found.The second revision was performed in the same day, the c-taper head was revised to a morse-taper head.
|
|
Manufacturer Narrative
|
An event regarding disassociation involving a metal head was reported.Review of the device history records indicate devices were manufactured and accepted into final stock with no relevant reported discrepancies.There have been no other similar events for the lot referenced.Conclusion: it was reported that during surgery a c-taper head was used with a morse taper stem.2 days after the revision surgery, the head dissociation was found.Based on the provided information it has been determined that this event is associated with an off-label application.The ifu qin 4309 ver e which was packaged with the device states 'howmedica osteonics femoral bearing heads are available in morse taper and c-taper designs for use with howmedica osteonics femoral stems with respectively compatible trunnion tapers.C-taper heads must only be used with those howmedica osteonics stems which have a c-taper trunnion and are labeled accordingly.No further investigation is required at this time.If additional information becomes available to indicate further evaluation is warranted, this record will be reopened.
|
|
Search Alerts/Recalls
|
|
|