Catalog Number 80340 |
Device Problems
Device Displays Incorrect Message (2591); Gas/Air Leak (2946); Adverse Event Without Identified Device or Use Problem (2993)
|
Patient Problems
No Patient Involvement (2645); No Known Impact Or Consequence To Patient (2692)
|
Event Date 10/07/2019 |
Event Type
malfunction
|
Manufacturer Narrative
|
This report is being filed to provide additional information.Correction: trima field action 35 has been initiated to notify all trima users of a potential safety hazard occurs if the system displays an alert and instructions are not observed and followed.Terumo bct is taking corrective action by reminding all users of the action to be taken to mitigate this risk.Alerts and instructions are presented to the operator if the sample bag inflates.Terumo bct instructs all trima users to provide supplementary training and to continue to use the trima accel system in accordance with the operator¿s manual.Root cause: specific root cause could not be definitively determined for this incident.Possible causes include: a clamp malfunction where the clamp skews to the side as it is closed, or the clamp does not fully occlude the tubing when closed due to interference between the clamp and the tube.Additional contributing factors could be related to user interface, where either the sample bag clamp was not closed at the system prompt or the clamp was closed but it was skewed on the tubing enabling a portion of the tubing to allow air to pass.
|
|
Manufacturer Narrative
|
Investigation is in process.A follow-up report will be provided.
|
|
Event Description
|
The customer reported that during set up for a procedure on a trima device, they received an error message to check the clamps.Upon inspection, the customer found the white clamps engaged and they verified set up again.At that time, the staff noticed that the sample diversion bag was full of air.Terumo bct is awaiting return of the disposable set.No patient (donor) was connected at the time of the event, therefore, no patient information is available.
|
|
Manufacturer Narrative
|
This report is being filed to provide additional information.Investigation: a review of the device history record (dhr) for this unit showed no irregularities during manufacturing that were relevant to this issue.An unused trima set was returned to terumo bct for investigation.Visual inspection revealed the sample bag was full of air.The white sidewall clamp was closed and showed some damage on one of the side walls.Corrective action: an internal capa has been initiated to evaluate the sidewall pinch clamp and air in the sample bag.Investigation is in process.A follow-up report will be provided.
|
|
Event Description
|
After multiple follow-up attempts, the customer did not provide further details for this event, including specific date and time.
|
|
Search Alerts/Recalls
|