Lot: k18g175 manufacturing date: 2018-07-01 expiration date: 2021-07-01.Lot: k18k265 manufacturing date: 2018-09-01 expiration date: 2021-09-01.The tube set for suction single-use aql-111 is packaged in a double blister.The complaint only states that it "appears" as if there are tiny pin holes in the packaging.This error description based on "optical pin impressions" does not conform an actually pierced sterile barrier.To pierce through one blister a certain amount of force is required and such damage would be visible.Therefore, considering that even in the unlikely event of a perforation, not both blisters are necessarily pierced.Corresponding transportation tests had been carried out and passed during development.The root cause cannot be determined yet, as we did not receive the tube sets for investigation.We could also not obtain further information from the complainant.However, the manufacturing site infus medical (b)(4) co., ltd.Checked the retain samples (3 units each lot) and could not determine any damage in the inner or outer blister nor to the sterile barrier.Also the dhrs do not show any abnormali-ties or deviations.The aql-111 belongs to the group of internally designated st282 tube sets.This is the first complaint of this kind of a total of (b)(4) delivered st282 tube sets until today.It cannot be excluded or con-firmed that a malfunction exists in this case, therefore an initial report will be filed.Wom will continue to attempt to obtain information and tube sets from the complainant and will monitor very closely over the next three months whether there are any other similar complaints.We acknowledge that we are filing this report past the 30-days frame.The individual who made the initial assessment for reportability erred and this was caught upon secondary review.
|