• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: DEPUY ORTHOPAEDICS INC US S-ROM M HEAD 36MM +9; S-ROM FEMORAL HEADS (11/13) : HIP METAL FEMORAL HEADS

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

DEPUY ORTHOPAEDICS INC US S-ROM M HEAD 36MM +9; S-ROM FEMORAL HEADS (11/13) : HIP METAL FEMORAL HEADS Back to Search Results
Model Number 1365-34-000
Device Problem Adverse Event Without Identified Device or Use Problem (2993)
Patient Problems Edema (1820); Hypersensitivity/Allergic reaction (1907); Pain (1994); Pocket Erosion (2013); Osteolysis (2377); Test Result (2695); No Code Available (3191)
Event Date 06/29/2018
Event Type  Injury  
Manufacturer Narrative
(b)(4).Initial reporter occupation: lawyer.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
 
Event Description
After review of medical records, patient was revised to address mechanical failure, right metal-on-metal total hip arthroplasty.Patient was noted to have elevated cobalt chromium levels to a fairly high level.Mri scan showed a pseudotumor in both hips.Revision notes reported that as the capsule was entered, a large amount of fluid was encountered.There was also a copious amount of cheesy-looking material that came out of the joint.The brownish-gray synovial membrane around the joint was likewise debrided using a rongeur.There was a significant erosion at the head-neck taper.The proximal femoral area was carefully evaluated and some osteolytic membrane was removed from the trochanteric area.Head and liner were removed.There was a bony prominence anteriorly on acetabular side and was removed using a curved osteotome and a rongeur.The stem was in 0 degrees anteversion or perhaps even 1 to 2 degrees of retroversion.An attempt was made to try to back the s-rom stem out using a chisel between the proximal sleeve and the neck.However, it was not possible to get the stem to dislodge, and the decision was made that rather than risk significant damage to the upper femur by trying to get the stem out, it would be better to just leave the stem in the version position it was in.Doi: (b)(6) 2004.Dor: (b)(6) 2018; (right hip).
 
Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.Product complaint # : (b)(4).Investigation summary : no device associated with this report was received for examination.The information received will be retained for potential series investigations if triggered by trend analysis, post market surveillance, or other events within the quality system.Depuy considers the investigation closed.Should additional information be received, the information will be reviewed and the investigation will be re-opened as necessary.Device history lot : null.Device history batch : null.Device history review : null.If information is obtained that was not available for the initial medwatch, a follow-up medwatch, a follow-up medwatch will be filed as appropriate.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
S-ROM M HEAD 36MM +9
Type of Device
S-ROM FEMORAL HEADS (11/13) : HIP METAL FEMORAL HEADS
Manufacturer (Section D)
DEPUY ORTHOPAEDICS INC US
700 orthopaedic drive
warsaw IN 46581 0988
MDR Report Key9825880
MDR Text Key188628685
Report Number1818910-2020-07694
Device Sequence Number1
Product Code JDI
UDI-Device Identifier10603295033523
UDI-Public10603295033523
Combination Product (y/n)N
PMA/PMN Number
K120599
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type consumer,other
Type of Report Initial,Followup
Report Date 02/24/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? No
Device Operator Health Professional
Device Expiration Date05/31/2008
Device Model Number1365-34-000
Device Catalogue Number136534000
Device Lot Number1110914
Was Device Available for Evaluation? No
Initial Date Manufacturer Received 02/24/2020
Initial Date FDA Received03/12/2020
Supplement Dates Manufacturer Received04/14/2020
Supplement Dates FDA Received04/15/2020
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
Patient Age67 YR
-
-