• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: COVIDIEN VISI-PRO BALLOON-EXPANDABLE STENT SYSTEM; STENT, ILIAC

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

COVIDIEN VISI-PRO BALLOON-EXPANDABLE STENT SYSTEM; STENT, ILIAC Back to Search Results
Model Number PXB35-07-37-080
Device Problems Difficult to Remove (1528); Difficult to Advance (2920); Device Dislodged or Dislocated (2923); Positioning Problem (3009)
Patient Problem No Consequences Or Impact To Patient (2199)
Event Date 04/20/2020
Event Type  Injury  
Manufacturer Narrative
If information is provided in the future, a supplemental report will be issued.
 
Event Description
Physician intended to use a visipro balloon expandable stent system during treatment of a 20mm calcified lesion in the patient¿s right superior mesenteric artery (sma) of diameter 7mm.Moderate vessel tortuosity and calcification are reported.Ifu was followed and the device was prepped without issue.It is reported resistance was encountered during advancement, but no excessive force was used.The device was unable to cross the lesion.The physician then attempted to pull the device back and the stent is reported to have dislodged from the balloon unknowingly.The physician then attempted to advance another wire and catheter and observed the unexpanded stent which had dislodged.The physician then attempted to use a snare kit to retrieve the unexpanded stent.The stent was captured but lost in the arterial wall.A cut-down was then performed to retrieve the stent.The physician then regained access successfully and placed a paramount mini stent at the target lesion to complete the procedure successfully.No patient injury reported.
 
Manufacturer Narrative
Additional information; all components of the device were removed from the patient's body.There was no vessel damage and the patient recovered successfully.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
 
Manufacturer Narrative
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
VISI-PRO BALLOON-EXPANDABLE STENT SYSTEM
Type of Device
STENT, ILIAC
Manufacturer (Section D)
COVIDIEN
4600 nathan lane north
plymouth MN 55442
MDR Report Key9985230
MDR Text Key190924378
Report Number2183870-2020-00124
Device Sequence Number1
Product Code NIO
UDI-Device Identifier00643169787797
UDI-Public00643169787797
Combination Product (y/n)N
PMA/PMN Number
P030045
Number of Events Reported1
Summary Report (Y/N)N
Report Source Manufacturer
Source Type company representative,health
Type of Report Initial,Followup,Followup
Report Date 06/09/2020
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? Yes
Is this a Product Problem Report? Yes
Device Operator Health Professional
Device Expiration Date09/18/2022
Device Model NumberPXB35-07-37-080
Device Catalogue NumberPXB35-07-37-080
Device Lot NumberA900666
Was Device Available for Evaluation? No
Initial Date Manufacturer Received 04/20/2020
Initial Date FDA Received04/22/2020
Supplement Dates Manufacturer Received04/22/2020
06/08/2020
Supplement Dates FDA Received04/24/2020
06/09/2020
Is This a Reprocessed and Reused Single-Use Device? No
Patient Sequence Number1
Patient Outcome(s) Required Intervention;
-
-