ZIMMER GMBH CMN FEMORAL NAIL, CCD 125, RIGHT, 11.5 MM, 18 CM; ZIMMER NATURAL NAIL SYSTEM CEPHALOMEDULLARY FEMORAL NAIL - ASIA SHORT
|
Back to Search Results |
|
Model Number N/A |
Device Problem
Fitting Problem (2183)
|
Patient Problem
No Code Available (3191)
|
Event Date 05/08/2020 |
Event Type
malfunction
|
Manufacturer Narrative
|
Concomitant medical products: znn, cmn targeting guide, asia; catalog#: 00249000900; lot#: 16306852.Cmn femoral nail, ccd 130, left, 11.5 mm, 18 cm; catalog#: 47249318311; lot#: 3008741.Therapy date: unknown.The manufacturer received images for review.The manufacturer did not receive the device for investigation.Where lot numbers were received for the devices, the device history records were reviewed and found to be conforming.A cause for this specific event cannot be ascertained from the information provided.As soon as supplemental information becomes available an updated report will be submitted.(b)(4).
|
|
Event Description
|
During surgery, when the surgeon tried to insert the nail into the device it would not fit in correctly hence another nail was used.There was a surgical delay of 16 to 30 minutes.
|
|
Event Description
|
No change to previously reported event.
|
|
Manufacturer Narrative
|
This follow-up report is being submitted to relay corrected and additional information.Additional: d10, h2, h6 correction: b4, g4, g7, h10.Investigation and conclusion.No relevant medical data has been received.No further due diligence required as all required information to support the conclusion is available or was already requested.Visual examination: the targeting device and two znn nails short were received.No damages or deformations could be seen on the devices.Functionality: a functional test was done.The function between the targeting guide and the nails is given.Both nails could be connected to the targeting guide.The products are intended for treatment.The investigation results did not identify a non-conformance or a complaint out of box (coob).Based on the given information and the results of the investigation, the complaint could not be confirmed as the alleged failure could not be identified or reproduced.The need for corrective measures is not indicated and zimmer gmbh considers this case as closed.Zimmer biomet¿s reference number of this file is (b)(4).
|
|
Search Alerts/Recalls
|
|
|