SMITH & NEPHEW, INC. JOURNEY UNI TIBINRT S5-6LM/RL8MM; PROSTHESIS, KNEE, FEMOROTIBIAL, NON-CONSTRAINED, CEMENTED, METAL/POLYMER
|
Back to Search Results |
|
Model Number 71422261 |
Device Problem
Inadequacy of Device Shape and/or Size (1583)
|
Patient Problem
No Known Impact Or Consequence To Patient (2692)
|
Event Date 05/29/2020 |
Event Type
Injury
|
Event Description
|
It was reported that the journey uni tibial insert sz 5-6 lm/rl 8mm is luxated when placed into the knee.The surgeon always fixes the inlay on the tibial plateau before implantation, it was fixed firmly and is luxated under load.It was not reported if/how the problem was resolved.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.
|
|
Event Description
|
It was reported that the journey uni tibial insert sz 5-6 lm/rl 8mm is luxated when placed into the knee.The surgeon always fixes the inlay on the tibial plateau before implantation, it was fixed firmly and is luxated under load.The problem was fixed through revision and change of the insert on (b)(6) 2020.Initial surgery was performed on (b)(6) 2015.
|
|
Manufacturer Narrative
|
H10: additional information in d7.H11: corrected information in b1, b2, b5 and h1.
|
|
Manufacturer Narrative
|
Results of investigation: it was reported that a journey uni insert dislocated when the patient went down on his knees.The primary surgery was done in (b)(6) 2015 and the revision was performed in (b)(6) 2020.The affected complaint device, used in treatment, was not returned for evaluation and it has been communicated that device is in patient's possession.Therefore a product analysis could not be performed.A review of the manufacturing records for the listed batch did not reveal any deviation from the standard manufacturing processes.A review of the complaint history for the listed part revealed no prior complaints for the listed failure mode with the same batch number.At this time, we have no reason to suspect that the product failed to meet any product specifications at the time of manufacture.A relationship, if any, between the device and the reported incident could not be corroborated.No medical documents were received for investigation.Therefore, no medical assessment can be performed at this time.A review of risk management files and the instructions for use found that the reported failure was documented appropriately.It was reported that the patient regularly performs kneeling work.Some potential causes of the reported event could include but are not limited to traumatic injury or overuse.Based on this investigation, the need for corrective action is not indicated.No further investigation is warranted for this complaint; however smith and nephew will continue to monitor for future complaints and investigate as necessary.Should the device or additional information be received, the complaint will be reopened.We consider this investigation closed.
|
|
Event Description
|
It was reported that the journey uni tibial insert sz 5-6 lm/rl 8mm luxated when the patient went down on his knees.The surgeon always fixes the inlay to the tibial plateau before implantation, it was fixed firmly and it luxated under load.It has been communicated that the patient is a roofer and regularly performs kneeling work.The explanted insert is in patient's possession and further information will not become available.
|
|
Search Alerts/Recalls
|
|
|