This medical device report is filed retrospectively following fda observation number 4 received by degania medical devices pvt.Ltd.During the fda inspection of 4-7 of november 2019.The observation was related to the fact that degania medical devices pvt.Ltd.Did not establish procedures for reporting mdrs to fda as a manufacturer.Till then all complaints related to the devices produced by dmd were assessed for mdr reportability and submitted as necessary to fda by degania silicone ltd.Another q medical devices division closely affiliated with dmd.Dmd capa number (b)(4) was issued to address the observation; one of the capa actions requires dmd to perform retrospective review of all the complaints received during 2018 and 2019 and submit to fda retrospective mdrs for the reportable events (with reference to original reported to fda in the borders of recall activity; report # (b)(4) report filed by degania silicone ltd.Incorrect temperature reading was caused by defective sensors, which are purchased component and assembled the sensors into the catheter.It was explained by the supplier of the sensors, that the cracks in defective thermistor tip did not appear immediately but developed following impact of different factors like time, transportation conditions, himidity.This is the reason the inprocess degania tests did not detect the problem.The sensor supplier has been taken the corrective action and improved visual aids were put on the working stations.
|
This is retrospective submission, following reassessment of our customer complaints during period 2018-2019.Customer's text: according to the reporter, the reports from the field on lower temperature measurement of 1.5 - 3°c comparing to real body temperature of the patients (verified with another device).The received samples confirmed the deviation.".
|