SMITH & NEPHEW, INC. ACCU-PASS STR SHUTTLE 45 DEG UP; ORTHOPEDIC MANUAL SURGICAL INSTRUMENT
|
Back to Search Results |
|
Model Number 7210425 |
Device Problem
Delivered as Unsterile Product (1421)
|
Patient Problems
No Information (3190); No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 10/22/2020 |
Event Type
Injury
|
Event Description
|
It was reported that during meniscus repair procedure, when the out of box was opened, the sterilization pack seal of the accu-pass 45-degree did not close from the first.The device was used on the patient.A backup device was available to complete the procedure with no delay or patient injuries.All available information has been disclosed.If additional information should become available, a supplemental report will be submitted accordingly.
|
|
Manufacturer Narrative
|
H10: h2: additional information: h6: health effect - clinical and impact code.H3, h6: the reported device was not returned to the designated complaint unit for independent evaluation.However, an analysis of the customer provided images found a device refencing a part number 7210425 and lot 50745677.Matching the reported one.The black monofilament seems to be all around the pouch.The pouch seem to be open, from the top and there's a hole from the left side.A review of device records showed there were no indications to suggest that the product did not meet manufacturing specifications upon release for distribution.A complaint history review found no similar reported events.The instructions for use were reviewed and found to include conditions of off label use and technique specifics, as well as precautions and warnings related to the use of the device.A risk management review found that the reported failure and/or harm was documented appropriately, and there were no indications to suggest the anticipated risk is not adequate.A review of the packaging procedure, found that the operator should place the device inside the pouch and inspect seal, set up verification in the boxing area and then, the sealed pouch should be placed with the ifu and patient label inside the carton before closing it.The root cause of the reported event could not be determined since findings can not lead to a clear cause of the reported event factors that could have contributed to the reported event include rough handling during transport or storage, or exposure of the packaging to excessive heat.The investigation findings were escalated to the manufacturing team, and it was determined that this type of punctured would suggest rough handling of the shipment and not a root cause that would impact other product lots.No containment or corrective actions are required at this time.
|
|
Manufacturer Narrative
|
H3, h6: the reported device was not returned to the designated complaint unit for independent evaluation.However, an analysis of the customer provided images found a device refencing a part number 7210425 and lot 50745677.Matching the reported one.The black monofilament seems to be all around the pouch.The pouch seem to be open, from the top and there's a hole from the left side.A review of device records showed there were no indications to suggest that the product did not meet manufacturing specifications upon release for distribution.A complaint history review found no similar reported events.The instructions for use were reviewed and found to include conditions of off label use and technique specifics, as well as precautions and warnings related to the use of the device.A risk management review found that the reported failure and/or harm was documented appropriately, and there were no indications to suggest the anticipated risk is not adequate.A review of the packaging procedure, found that the operator should place the device inside the pouch and inspect seal, set up verification in the boxing area and then, the sealed pouch should be placed with the ifu and patient label inside the carton before closing it.The root cause of the reported event could not be determined since findings can not lead to a clear cause of the reported event.Factors that could have contributed to the reported event include rough handling during transport or storage, or exposure of the packaging to excessive heat.The investigation findings were escalated to the manufacturing team, and it was determined that this type of punctured would suggest rough handling of the shipment and not a root cause that would impact other product lots.No containment or corrective actions are required at this time.
|
|
Search Alerts/Recalls
|
|
|