MAUDE Adverse Event Report: MEDTRONIC XOMED INC. VISUALASE; LASER INSTRUMENT, SURGICAL, POWERED

Model Number	9735559
Medical Device Problem Code	Mechanical Problem (1384)
Health Effect - Clinical Codes	Unspecified Tissue Injury (4559); No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/24/2020
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
No parts have been received by the manufacturer for evaluation.If information is provided in the future, a supplemental report will be issued.
Event or Problem Description
Medtronic received information regarding a thermal therapy system being used in a soft tissue ablation.It was reported that the stylet was stuck inside the catheter, and the health care professional was unable to insert the lase.They had to open up a new kit to continue with the case.This caused a 30 minute delay in the procedure.There was no impact on patient outcome.
Event or Problem Description
Additional information was received.It was reported that the patient was discharged without complications.
Additional Manufacturer Narrative
H2) additional information: see b5.H3) the catheter for the thermal therapy system was returned to the manufacturer for evaluation.Testing found that the guide wire was stuck in the cooling catheter as the guide wire was too large for the catheter.The hardware investigation found that the reported event was related to a hardware issue.This issue was documented in a medtronic navigation hardware anomaly tracking database.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
Additional Manufacturer Narrative
Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
Additional Manufacturer Narrative
The inner cannula of the ccs should measure 0.043+/- 0.001 inches (1.0668 mm 1.1176 mm), the stylet measures at 1mm.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
Additional Manufacturer Narrative
H2: additional information: see b5.Additional coding updated.Medtronic is submitting this report to comply with fda reporting regulations under 21 cfr parts 4 and 803.This report is based upon information obtained by medtronic, which the company may not have been able to fully investigate or verify prior to the date the report was required by the fda.Medtronic has made reasonable efforts to obtain more complete information and has provided as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.In particular, this report does not constitute an admission by anyone that the product described in this report has any ¿defects¿ or has ¿malfunctioned¿.These words are included in the fda 3500a form and are fixed items for selection created by the fda to categorize the type of event solely for the purpose of regulatory reporting.Medtronic objects to the use of these words and others like them because of the lack of definition and the connotations implied by these terms.This statement should be included with any information or report disclosed to the public under the freedom of information act.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.A good faith effort will be made to obtain the applicable information relevant to the report.If information is provided in the future, a supplemental report will be issued.
Event or Problem Description
Additional information was received.It was reported that the catheter had been placed in the anatomy when the stylet was found to be stuck.

• Brand Name: VISUALASE
• Common Device Name: LASER INSTRUMENT, SURGICAL, POWERED
• Manufacturer (Section D): MEDTRONIC XOMED INC.; 6743 southpoint dr n; jacksonville,fl CO 32216
• MDR Report Key: 10935887
• Report Number: 1723170-2020-03146
• Device Sequence Number: 2644718
• Product Code: GEX
• UDI-Device Identifier: 00763000218171
• UDI-Public: 00763000218171
• Combination Product (Y/N): N
• Initial Reporter State: PA
• Initial Reporter Country: US
• PMA/510(K) Number: K053087
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: company representative,health
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup,Followup
• Report Date (Section B): 05/11/2021

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 11/20/2021
• Device Model Number: 9735559
• Device Catalogue Number: 9735559
• Device Lot Number: 0218984258
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/07/2020
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/24/2020
• Supplement Date Received by Manufacturer: 11/24/2020; 12/15/2020; 01/22/2021; 04/19/2021
• Initial Report FDA Received Date: 12/02/2020
• Supplement Report FDA Received Date: 12/09/2020; 12/29/2020; 02/10/2021; 05/11/2021
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 6 YR
• Patient Weight: 18