Catalog Number 8065752439 |
Device Problems
Alarm Not Visible (1022); Pressure Problem (3012)
|
Patient Problem
No Clinical Signs, Symptoms or Conditions (4582)
|
Event Date 01/26/2021 |
Event Type
malfunction
|
Manufacturer Narrative
|
Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional reportable information becomes available.(b)(4).
|
|
Event Description
|
A customer reported the ophthalmic surgical system and cassette had intraocular (iop) compensation issue during a surgical procedure.The cassette was exchanged and the problem has not recurred.The case was completed with no impact to the patient.Additional information has been requested and received that no system message was displayed during the vitrectomy procedure.There was an issue with the anterior chamber collapse of the patient.There was no patient harm reported.
|
|
Manufacturer Narrative
|
The returned sample was visually inspected and no obvious defects were found.The non-invasive flow sensor (nifs) on the cassette housing was in good condition.A calibrated console representing the current software version was used to test the sample.The ball in the drip chamber¿s check valve moved freely per specification.The led rings on the console turned green as the probe connectors were engaged to the console indicating the proper communication between the probe and the console.The sample could prime and pass iop calibration successfully.No anomalies were observed during priming.No system message code was generated during testing.Fluid flowed from the bss bottle to the drain bag without any interfering.No leakage was detected from the pump elastomer or on the pump area of the fluidics module.Cleaning process was able to be performed after functional test had completed.The root cause of the customer's complaint could not be established; the returned sample functioned per specifications.After an investigation of this complaint, it has been determined that this sample functioned per specifications; therefore, no corrective action is required at this time.The manufacturer internal reference number is: (b)(4).
|
|
Search Alerts/Recalls
|